PVR 150 delay

Dergrin

n00b
Joined
Mar 14, 2005
Messages
24
Ok I just got my pvr150 in the mail and hooked up. I expected a delay between the xbox and the computer because of hardware encoding. I had read that to bypass this all I had to do was install Dscaler. Well I installed it and have it configured in Sage TV (which you have to use an encoder from elecard.com) and there is still a 5 second delay. How do I get around this?
 
You can't bypass it. The PVR-150 is a hardware encoding card, which means that you are always watching recorded video. With a software encoding card, you are watching a live raw video feed and the recording (if you choose to record) goes on in the background.

DScaler is the program of choice if you want to hook up a video game system through a software encoding card, but for a hardware encoder it won't change anything.
 
:confused: I was under the impression that this was impossible, even with graphedit. This intriuges me...

btw graphedit = my worst nightmare, messed with it a bit a while back in a situation related to mediaportal
 
every console>PC thread I ask the same question...Why? I never really get a straight answer.
 
I am going to try a few things out during my lunch break. I will let you all know how it goes.
 
Wait, are you using SageTV to do this in? Because you need to use Dscaler for this not Sage. Sage will only work with it in hardware "mode."
 
Ok from what i've found, you need to select YUV output in DScaler for this to work.
 
k1114, I read that Descaler4 is not compatible with the pvr 150.

crimandevil, I am trying to get it so I can play console games on a projector.
 
does the projector not haev svideo inputs? or go full tilt and get a VGA transcoder. that way you won't have to rely on your PC to play games. little break out box just transcodes the signal to VGA. Depending ont he projector, you might have a deinterlacer right in the projector. My xbox running to the X1 with svideo looks as good as component into a vga converter.

any of those options will offer less headach and arguably better graphics than going throught the PVR card and the PC.
 
Dergrin said:
k1114, I read that Descaler4 is not compatible with the pvr 150..

Thats what I thought, I just pulled that info from another forum.

If you just want to use the card for input, I would have gone with pretty much any cheap software encoding cards. Pretty much all of them will have zero lag time.
 
IDversusEGO said:
does the projector not haev svideo inputs? or go full tilt and get a VGA transcoder. that way you won't have to rely on your PC to play games. little break out box just transcodes the signal to VGA. Depending ont he projector, you might have a deinterlacer right in the projector. My xbox running to the X1 with svideo looks as good as component into a vga converter.

any of those options will offer less headach and arguably better graphics than going throught the PVR card and the PC.

Where here is the deal. It is a lumenlab diy projector with only a vga out. I run it through the computer for dvds. I have always wanted a tv tuner for my computer because I dont own a tv and it is a cheaper solution. I thought getting the transcoder would be an extra cost I could do without. The pvr 150 has the highest recomendation so I thought I would get it. I knew it would have a delay but I expected at least one work-around to work.

So anyone have a good, 0 lag, inexpensive, software encoded tv tuner card recomendations?
 
with this situation, unfortunatley you get what you pay for. some software cards I have seen used with decent results are the hauppauge win-tv card and the leadtech card. I think it is on newegg for not too much.
 
The leadtek is probably the route I will take. I was really close to getting that one before I got the pvr 150 but didnt.

Thanks for all your help. BTW, I am still looking for solutions around the pvr150 lag if anyone has any ideas for me to try.
 
Dergrin good to see you here. Unfortunately i can't help you out with this particular issue :p

If anyone's interested he has some nice results posted in the erm, "results forum" @ lumenlab.
 
k1114 said:
:confused: I was under the impression that this was impossible, even with graphedit. This intriuges me...

btw graphedit = my worst nightmare, messed with it a bit a while back in a situation related to mediaportal


You may make the delay shorter but it will always be there. and Dscaler will not work with hardware cards period, it uses direct hooks to the card and those hooks are not possible with hardware cards, this is why dscaler 5 (a mpeg decoder) is indevelopment to provide some of the dscaler benefits to the cards output. This is just one of the biproducts of hardware cards. Do you want 0 cpu usage but a 2 second delay, or real time but high processor usage?

and yep. graphedit is not to be messed with unless you are sure what you are doing. kind of surpriseing how codecs are used in some things on a computer...

edit: and sage requires hardware cards to work.
 
Okay, okay..

The reason why Dscaler will work with it is because the design is different from the PVR250/350 and alittle like the Rosalyn cards which DO work in a software like mode because the design is different enough to bypass the hardware encoder and just dump the video feed in realtime. Normally Dscaler won't work with hardware encoders because theres no way to by pass the encoder and display in realtime but the PVR150 cards have a different layout which does allow by passing the hardware encoder, I just don't know how since I don't have one but I do know you have to use Dscaler in order for it too work.

Anyways if you want a card that does what your current card can do then get this and use Dscaler: http://www.newegg.com/app/ViewProductDesc.asp?description=14-144-301&depa=0
 
DScaler4 works with my PVR-150.

Download Here

Turn off SageTV and just use DScaler (make sure to select the PVR-150 as the source). I've heard several people say that this doesn't work, so it may just be a hit-and-miss situation with the PVR-150 cards.
 
Thanks for all the help guys. I will try descaler4 today and see if it works. I don't know if I will have a chance during lunch or not.

And is there anything different between the PVR 150 hardware and PVR 150 MCE hardware besides the fm tuner?
 
Descaler4 does work afterall. I guess if it is a hit or miss I got lucky. There is a very very slight delay but I dont think it is anything that will cause a problem.

Thanks farscape and everyone else for all of your help.
 
i use dscaler4 to play ps2. sometimes, dont play console much. there is some delay, but not much. with my computer (athlon xp 2000, gforce fx 5600) i can only use dscaler, if i try to look something up on the net or do anything, it will make the delay longer. and the delay will slowly get longer as i play. you can always go to dshow-reset card and it will fix the delay that has started. might just be my slow computer tho.
the only thing i use is dscaler. i dont like how sagetv records as i watch. dont have enough hard drive space yet to deal with that. only use it to check the preview channel.
 
Yeah after being all excited yesterday at lunch I decided to fire it up and play some halo 2 after work. My friend and I get all pumped for some coop and started the heroic campaign. Although the delay wasnt 5 seconds long anymore there still was about a half second delay that increased about a second every 10min or so. So every 10 min we would do the reset card option and keep playing. The game was playable but not entertaining. The delay was enough to take the fun out of the game.


So this brings me to my next question. Anyone play any games with the Leadtek card and is there any delay?

If you have any other suggestions for a 0 delay card with a tuner please post it. I know you posted the XCapture card CrimandEvil but it doesnt have a tuner.
 
go to the local sperm bank, donate some sperm, take the $50 and buy an x2vga. trust me, the little bit of tuggin will be worth it.
 
I am not very knowlegeable in this area so correct me if I am wrong. Those converters do just that, convert. They can't upscale the image like a computer can so, what will that do to image quality? Will it be noticable?
 
are you running FFDshow on the video game? if not, the PC is not doing any upscaling. it is taking the native res and stretchingit to full screen. The transcoders will reproduce the image at the native res of the box. in the case of the one above, it will go as high as 1024x768.

as a side, if you are doing FFDshow on the game consoles, it could introduce a little lag as well.
 
Well I have installed FFDshow and in Dscaler when I chose my card is says "Hauppauge PVR 150 MCE (Dshow)" Does that mean it is going through FFDshow. Is FFDshow used on all players once installed? I never did any specific configuration in Dscaler for FFDshow.
 
easy way to find out if FFdshow is running, turn ont he OSD. on a side note, if you can't tell a difference, is it worth using FFDshow? If a tree falls in the woods...
 
If I recall correctly I had the OSD on and it wasnt showing in DScaler so I guess it isnt due to FDshow. I will double check tonight.

People said they had improvements using Zoomplayer and FFDshow over WinDVD6 so I thought I would give it a try. It seems too buggy to me. I might mess with it some more in the future but for now I am sticking to my WinDVD6.
 
I have been looking into the universal upscaler vga adapter from lik-sang suggested a few replies up. Games dont look as good as I want them to on Dscaler (deinterlacing artifacts). Will games look better going through this box?

I noticed there is also a progressive only vga adapter with only component inputs at lik-sang. What happens if the game being played doesnt support progressive? Will it not work using this adapter?
 
I tried my ATI PCI turner card but no luck with it. I was running Xbox>VCR>ATIpci>27" Gateway Destination. It lagged by one to two seconds... no fun.

I assumed my WinTV card would do the same so I did not try it... I will attempt soon.
 
there are tons of places that sell those things. Just try to get a transcoder. they offer the best PQ. enwegg, directron, whatever. Liksang is just a cool place to get novelty console equipment.
 
Back
Top