I blew a cap on my old Gigabyte 8IRXP. A lot of dust had collected in the fins of my heatsink [Alpha w/ lots of pins]. I believe that attributed to me blowing the cap. The funny thing is that the system was *fine* but would randomly reboot/freeze every now and then. I attribute that to either the cap or the CPU overheating.
So I bought a 8IPE1000-G and an Antec True Power 430 [I had a 400W Antec before]. I assembled everything and after a little card swapping everything is fine. The only oddity is that every now and then my system will just freeze and I will have to reboot. I've run memtest and my ram passes just fine. I can run Prime on torture setting [or any setting] and it wll pass just fine. The highest my CPU temps get are around 31-32C.
CPU is a 1.6a@2.1 [currently at 1.6]
MB - Gigabyte 8IPE1000-G [rev 4]
RAM - 2x512 PC2100. Oddly enough I thought I had PC2700, but it turns out I don't. The only multiplier available to me is 2.6, so it's forcing me to run the bus at it's native 100mhz. Thus the non-existant CPU overclock ATM
VID - Nvidia 6600
Blah blah those are the major things.
I can play BF2 for hours on end, etc... and not get a freeze. But when I'm doing the most mudane tasks in XP it just freezes on me, forcing me to reboot. Everything is running at stock speeds ATM and 4 drives have plenty of cooling, CPU is fine... I figured maybe PS, but my old PS was just fine and this is a more updated version. More power on all rails, dual +12, etc.
So the system will pass all the synthetic tests, and will pass under real world torture. But when not put under any load I will get the freezing. One would think if I had faulty hardware the system would manifest itself when it was being stressed. The only other thing I can think of is maybe it's my copy of XP. I didn't re-format/re-install windows after the new motherboad installation. I thought possibly I could have damaged my CPU due to inadequate cooling [when the fins were blocked and I didn't know] but again... passes prime and gaming just fine.
I'm at a loss really. Tomorrow I'm probably going to try to rule out the drives by downloading the various manufacturer's HD utilities and testing them out. If they check out fine then the only other possibility I can think of... is my current Windows installation. If it's not either of those... what would you suggest?
So I bought a 8IPE1000-G and an Antec True Power 430 [I had a 400W Antec before]. I assembled everything and after a little card swapping everything is fine. The only oddity is that every now and then my system will just freeze and I will have to reboot. I've run memtest and my ram passes just fine. I can run Prime on torture setting [or any setting] and it wll pass just fine. The highest my CPU temps get are around 31-32C.
CPU is a 1.6a@2.1 [currently at 1.6]
MB - Gigabyte 8IPE1000-G [rev 4]
RAM - 2x512 PC2100. Oddly enough I thought I had PC2700, but it turns out I don't. The only multiplier available to me is 2.6, so it's forcing me to run the bus at it's native 100mhz. Thus the non-existant CPU overclock ATM
VID - Nvidia 6600
Blah blah those are the major things.
I can play BF2 for hours on end, etc... and not get a freeze. But when I'm doing the most mudane tasks in XP it just freezes on me, forcing me to reboot. Everything is running at stock speeds ATM and 4 drives have plenty of cooling, CPU is fine... I figured maybe PS, but my old PS was just fine and this is a more updated version. More power on all rails, dual +12, etc.
So the system will pass all the synthetic tests, and will pass under real world torture. But when not put under any load I will get the freezing. One would think if I had faulty hardware the system would manifest itself when it was being stressed. The only other thing I can think of is maybe it's my copy of XP. I didn't re-format/re-install windows after the new motherboad installation. I thought possibly I could have damaged my CPU due to inadequate cooling [when the fins were blocked and I didn't know] but again... passes prime and gaming just fine.
I'm at a loss really. Tomorrow I'm probably going to try to rule out the drives by downloading the various manufacturer's HD utilities and testing them out. If they check out fine then the only other possibility I can think of... is my current Windows installation. If it's not either of those... what would you suggest?