psu troubles

Joined
Jan 17, 2005
Messages
21
i currently have an asus a8n-sli deluxe, a leadtek gt6800 and a 3500 with 1gig of corsair xlpro3200

i cant get my pc to boot with a pcie gfx card ( leadtek one ) but i can get it to boot with a pci normal s3 verge dx thing from like 1997

(i'm not overclocking YET - going to try and get everything working properly before i moan that i cant get anywhere with overclocking)

i have tried a crappy qtec psu(650w), and just got an enermax 600 w thingy (see link)

Enermax Noisetaker 600W EG701AX-VE(W) SFMA ATX2.0 PSU (CA-013-EN)
on
http://www.overclockers.co.uk/acatalog/Online_Catalogue_Enermax_111.html
page

anyone got any idea's, i've been building pc's for years, and never had this kind of problem before
is the gfx card broken or the mobo broken? or is it psu related?

i think it maybe because i do not have enough amperage going through the +12v
it says it has duel rails at 18 each, which the asus mobo manual says should be fine

i've upgraded the bios, but this solves nothing.

help me please, as its doing my head in :confused: :mad:

basically what i wanna know is, should i \rma the mobo or gfx card, or just get a new psu??

i have managed to get windows on it, but i still get gfx corruption on it when using the pci s3 verge, but only a little, so thats why i assume not engh power, but if it is a faulty motherboard or gfx card, then rma those?

if this is posted in the wrong place, feel free to move it mr/mrs mod, but please tell me so

ps i live in england, so newegg links are no use at all, sorry


and while i'm posting.....what's all this about sata with NCQ, i have 4 sata ncq hard drives all n this system, and all seem to work fine i''m guessing that there'ssomething wrong there in itself then

they are seagate 80 gig sata with ncq
and seagate 160 with ncq
 
My guess is that it's power supply related. I think you may need to have a PSU with one strong 12 volt rail, instead of two 12 volt rails, even if the split rail adds up to a good amount. So, possibly try a new PSU. Didn't click on the link, but make sure it's a 24 pin PSU, and try your best to make sure the video cards are getting power without them sharing anything if you're using the two molex to one six pin PCI-E converter plug. If you can, get a PSU with two six pin PCI-E video card plugs.

I'm using a PC Power and Cooling 510 SLI, I've heard of someone using an OCZ 520 watt unit with good luck, the guy with the OCZ unit was from the UK if that helps. An Enermax would be fine if it has one big 12 volt rail and not a split one, I assume. Heard of people with decent luck with Antecs as long as the power is all on one rail, and it's a 24 pin PSU.

As for NCQ, the problem is the beta BIOSes. The stock BIOS, 1002 is weak on overclocking without using a third party application like Clockgen. But, the beta BIOSes put out by ASUS all seem to not support NCQ hard drives. BIOS 1002, the one that's probably on your motherboard does though, so unless you want to risk having the board drop your hard drives (or maybe use the silicon image ports instead of the NVidia SATA ports), don't put in any of the beta BIOSes if you're going to use NCQ hard drives.
 
With your rig with no overclocking you should be fine with that powersupply. I mean you don't have a whole lot drawing from that 18a rail. I run a similar setup with a Neopower with only 18a on that rail and it holds. It could be the powersupply is weak in itself. Check what the voltage is on your 12v rail. It will only detect the ATX one which connects the vid card, but that should be what you want to see.
 
the graphics card was monged i think, maybe,

enermax have just brought out a new power supply same specs, for SLI, check their website, i'm going to see if i can get them to swap it out for me, or at least find out wether there is much difference, i mean, i dont really want to buy 2 new psu's this year, that'd be just hasstle


i'm running beta bios 1003-008, and i'm having no problems with ncq drives (seagate ncq 7200.7 ones) - its probably just maxtors - they're the ones i noticed everyones having problems with - not that i particularly hate maxtor - i have 4 maxtor, its just recently one died, and it had LOTS of important data on it, had


i'll try it again when i get this new gfx card.

rma'd it anyway - the psu says its been apprveoved pretty much for what i want it to do.

thing is, i'd like room for overclocking anyway, i may be getting a watercooling set up in summer

so what woud you guys reccomend i got instead?

(even if i have to ebay this one)
 
Back
Top