PSU or something else I am confused!!

jpierce55

Weaksauce
Joined
Oct 14, 2003
Messages
83
To think I use to build pc's? Well things use to always go good not this time.

I got my 800GTO and powersupply today. Hooked it all up and the onlyl things that work is the fans. All of the fans work even the ones off the big power connectors but no light on the floppy and the dvd-rom will not open.

Is this the PSU or something else? edit I think no I tried my old PSU and the DVD rom still will not open.

Can a bad mobo do this?
 
Sounds like you fried something. Does the system POST? Put the original components back in. Make sure you're doing this with a barebone setup [on a cardboard box (out of the case) with just the mobo/cpu/hsf/ram.stick/psu/vidcard (only one stick of ram)]. FYI, a PSU tester is about $15 bux at the store. What parts did you get? we need details, not just "X00W psu," so please, tell all.
 
Most of it is new the old setup was a 2800 Barton the processor died in. The processor, mobo, psu, g-card are all new. I don't think I fried anything nothing worked to get fried in the first place, anycase I read a review on NewEgg of the same thing happening to somebody else with this board.
 
ECS gave me several things to check I will check this weekend but doubt as the problem, that is one of them.
 
This is a suggestion as I have made this mistake many o times, make sure you have all of your power connectors plugged into your motherboard (20 or 24 pin mainboard connector and 4 pin auxillary) Now I have also run into this...Some AMD systems you have to have both the 24 pin and the 4 pin aux (the yellow and black wired connector) Now with intels i've seen where you just plug in 24 pin connector without the 4 pin aux....Also can you please post some pics of the inside of your rig in it's current non working state?
 
It is a hardware compatibility problem with the ram, even with the Super Talent ram out the video still does not exist but the dvd-rom opens/floppy works. Not sure if the processor fires or if the HDD fires as I can't hear them.

I ordered a new EVGA board and will RMA this one and sell it/ or just sell it. First I will see what happens with the new board. New g-card, two sticks of new ram, new processor.
 
New EVGA board works and fits much better, the ECS was a tight fit as far as screws go.
 
Back
Top