PSU or mobo - how to test?

Cruiza

[H]ard|Gawd
Joined
Mar 17, 2008
Messages
1,701
Long story short, when I plug in the 12v CPU power connector to the mobo my computer won't start up. Is there a way to test which component is faulty besides swapping out parts? Or has anyone else heard of a similar problem and has some advice? Thanks!
 
You're gonna need to be more specific than that man, we aren't psychic. When describing an issue with a computer, it's not a good idea to "make it short" when details are important.

With that being said.

What do you mean if you plug in the 12v CPU connector it wont POST? So if you leave it unplugged, it will POST just fine?

Generally if one of the components are faulty, then the BIOS will inform you with a series of beeps; though this isn't always the case.
 
Sorry. If the 12v connector is NOT plugged in, all fans run and lights light up. Obviously I still have no video though since my CPU is not receiving power. If it IS plugged in, I get just a millisecond of power and then nothing.
 
The way to test a PSU or motherboard issue is to plug in a new PSU. It does not have to be anything special. Unplug all hard drives/fans etc. Just try to power up the board/cpu/gpu.

If you do not have another PSU, use a voltmeter and check all 24 pins on the main connector and 4/8 pins on the P4/EPS connector.
 
Back
Top