• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

PSU exploded - help

DarkGhost

n00b
Joined
Jan 15, 2014
Messages
20
Had an Antec-750tp. Basically I dropped water from my desk, and I guess one droplet made it through the fencing of the PSU. I turned PC off immediately, took the blow dryer and dried it out for awhile. Went to turn on PC, 2 seconds later, loud POP and small explosion from PSU. No fried smell. I wanted to know if there is a great chance my other components are destroyed, mainly my hard drive. Could I send it to Antec under warranty?
 
Last edited:
Could you? yes. Would it be possibly illegal and definitely scummy as all hell? yes.

in short: I vote you don't do it.
 
There is a good chance this sort of thing could have affected components--no way to know until you test the system.

It's also dishonest to submit a warranty the PSU, and RMA centers can sometimes tell if there is water damage.

A good rule of thumb is to let water-leaked electronics to dry for many days with some sort of desiccant (uncooked rice is a good example)--because water can wick through tight surface gaps where forced-induction heat for a short amount of time may not do anything to drive the water out.
 
There is a good chance this sort of thing could have affected components--no way to know until you test the system.

It's also dishonest to submit a warranty the PSU, and RMA centers can sometimes tell if there is water damage.

A good rule of thumb is to let water-leaked electronics to dry for many days with some sort of desiccant (uncooked rice is a good example)--because water can wick through tight surface gaps where forced-induction heat for a short amount of time may not do anything to drive the water out.

Thanks for the tip. Will place suspected parts in rice. I won't be sending it in. This snow storm over the U.S. will delay my new PSU arrival though..
 
Back
Top