Properway to switch mobos?

sdk

[H]ard|Gawd
Joined
Dec 2, 2003
Messages
1,597
I have a asus p4pe and I will be going to a ic7g that I bought used off here. What is the best way besides switching then reformating + windows?

also in the zif socket there is white stuff? and on the nforce2 he took the hsf of so when he shipped it it would be better, should i clean that with alcohol?
 
Backup your important data first.

2nd remove the old mobo and transfer over the CPU (after cleaning it), heatsink (after cleaning it), RAM, and video card. Power it on outside the case to verify it's working before you put it in. Put in case, attach drives. Leave out any devices you don't need to get windows installed.

If you want, load the BIOS defaults, but I usually don't since it's typically that way to begin with. Install Windows.
 
Some of this is just individual preference, but I would save my data, then format the hard drive, then shut everything down and procede with the swappage - perfect time to run to the store and grab some arctic silver. Much like mentioned above its also a good time to rid the case-heatsinks-power supply- etc of the tribe of dust bunnies inhabiting the case. Dust removal is best accomplished in the great outdoors, otherwise the little buggers will find a home in your home. If you don't have a compressor with line dryer, go pick up some canned air at your local PC store, and while you are at it pick up a spare fan or two (they're always good to have around)

After the board swap reload the OS and copy your data back. Whatever you do do not attempt to run the new mobo with the old OS unless you like lovely errors and blue screens.

And if you are thinking about using a vacuum cleaner to suck up the dust, don't. the dust and stuff passing through the nozzle of the vaccum hose can develop a LARGE static charge.
 
Back
Top