{Project} Spicy's File Server

as promised, some photos of what's currently being done.

a few angles of the box, with all the openings cut.

p1010174x.jpg


p1010173x.jpg


p1010172l.jpg


these photos were taken after applying a 2nd coat of the stain / polyurethane combo.

I will take steel wool to it again, and apply one ore two more coats.
 
Here is some more images, this is work I completed today. I still have a few more items to work out.

I hope to have this done within the next few days...

p1010004oel.jpg


p1010005fkf.jpg


p1010006foq.jpg


p1010008i.jpg


p1010009g.jpg


p1010011gxh.jpg


p1010012uql.jpg


p1010013pae.jpg


p1010014knn.jpg


p1010015xwz.jpg


p1010016g.jpg


p1010017xvn.jpg


p1010018d.jpg


Whew! :D

I need to wire up the push buttons to the MB for power and reset. I need to connect a molex connector to the two fans that are going to blow across the processors. I need to make some small blocks to mount the LCD character display. and finally finish the wiring to a small relay board to turn on the 750W power supply when the 1st power supply turns on.
 
Looks like a fun job to wire up :D I'd drop by to assist if I lived nearby ;)
 
I appreciate the offer for help :)

it's almost done. I can't wait to plug it in, and start moving files from the old file server, and de-commission it.
 
:eek: I haven't updated for a long, long time.

The system is running great, and I am upgrading it with some more hard drive space.

The only thing I haven't finished is the top lid, and the display readout on the front.

With the holiday season, i've been extremely busy with work, only getting 1 or no days off, until the end of December.

I'll try and keep this thread updated.

Thanks!
 
You must log in or register to reply here.
Back
Top