PROJECT: exploit socket A pltform

mops

Weaksauce
Joined
Aug 18, 2002
Messages
69
Hello.
I'm building my last socket A machine. Basically I want to get the fastest socket A mobo and the fastest chip for it. FOr the chip I'll be getting a barton 2600+ XP-M.
as for the motherboard...
as far as i'm concerner the best overclockable mobos are abit NF7-S rev2 and DFI Lanparty revB. both have nForce2 chipset.

I have watercooling for the cpu and i'm expecting to run reliably fsb speeds in the vicinity of 230 MHZ

Now, I was wondering, theres a new socketA chipset out -= via KT880. It's very new and I'm not sure whether I should get one of the abouve mentioned mobos or wait till KT880 will be out ???

Essentially I'm aiming for 2.7 GHz, I think that woudl give me anough speed to wait till alhlon64 is really fast and cheap.

any input welcome.
 
Abit NF7-S dont get the S2 or whatever its called make sure you get the NF7-S.
Next whats wrong with the PC in your sig do you want another PC or are you upgrading that one cause If it was me I would just save your money. The extra 400 mhz and bumped up FSB isnt going to get you out of this world perfomance. I would wait tell the newer 64's come down in price then pick up a socket 939 and with PCI express 16x cause your going to want that eventually. Thats how I see it anyways. I have a Nf7-s with a 2500xp at 2.2 ghz on stock cooling and DDR400 at 2-3-3-5 and its fast enough to run all the latest games. However I am hanging on to my gf 4 for the time being until I do a complete upgrade next summer to PCI express graphics card and sock 939 board. Just because I dont wanna go out and buy a 400 dollar GPU then have to buy another one next summer for pci express. But if your building an additional rig I would say what you have down looks good. What ram are you going to use its key to making sure you hit 230 FSB along with an unlocked proc so the mobile should be good cause I think it comes unlocked maybe i am wrong. Another thing is that if you go to the abit forums alot of people are buying 2 sticks 256 because the nf2 doesnt like 2 sticks 512 at 1T you can always get the modded bios though. But a majority of them either have 2x256 or had 2x512 and traded it for 2x256 check it out at abit forums where the NF2 chipset forum is. Theres also a boat load of modified bios for the NF7-S I use the merlin which seems to allow me to run at 2.2 alot more stable than the stock ones. I was getting lock ups and after I upgraded It no longer locks up. Thats just my ten cents now everyone can chime in and tell me what I am wrong about lol. Good Luck just make sure you get the right parts the first time.
AND NO ABIT NF7-S2 or NF7-S? you want just the NF7-S rev 2.0

I would still be running watercooled its just that I am going to college and dont want any leakage or theift to happen. But I couldnt hit 215 fsb with my ram until I got the merlin NO CPC bios which runs it at 2T. But I also dont have the best ram in the world.
 
I was about to buy the Lanparty and the XP-M 2600+ and put in my Vapochill but i didn't since DFI just announced a new Socket 754 Lanparty and the A64 is about to come out in 90nm flavour. The Combo won't cost that much more then your Socket A set up and will deliver A LOT more. So currently Im waiting. I Live in Germany and according to my inquiery the LanpartyUT 915 is about to hit the retailers now it was announced on the 26th of July and the LanPartyUT was announced on the 16th of August.

Now if the same Logistics apply the LP UT 250Gb should start appearing in 20-30 days. About the same time as the 90 nm... LoL.
 
Back
Top