Uncle Humjaba
Limp Gawd
- Joined
- May 6, 2006
- Messages
- 440
I know it's been done before, but I just had to put it up...
Recently upgraded the internals of my main rig, so I had some parts left over... Didn't have a case left over so I made do without one. I tore apart a plastic coat hanger and placed peices of it under the mobo as risers to keep it from getting the cardboard too hot. I plan on adding a couple 80mm fans to exhaust some of that trapped hot air. I may make a carboard flap to go over the dvi ports and the other ports in the back, just so it looks nice
See old rig in sig for hardware (it has the WD 80gb hdd)

so I got it all together and realized... crap... i don't have a power button. never fear! i shall make one. so i got a staple, bent it in half, and put some tape on it. shorted the two jumpers that the power button hooked up to and it came alive. that worked alright, but i also had this 1/4" to 1/8" adapter. I tried it because I lost my staple and it worked much better (better contact = less fidgeting trying to get a connection)

installing windows... couldnt get the cd drive out of this old dell so i just hooked it up close by

my wonderful i/o plate

the goodies

it's current resting place. runs a bit warm (CPU is ~45*C under mediumish load) so i'm not going to run it much until I get a chance to get those 80mm fans.
Recently upgraded the internals of my main rig, so I had some parts left over... Didn't have a case left over so I made do without one. I tore apart a plastic coat hanger and placed peices of it under the mobo as risers to keep it from getting the cardboard too hot. I plan on adding a couple 80mm fans to exhaust some of that trapped hot air. I may make a carboard flap to go over the dvi ports and the other ports in the back, just so it looks nice

so I got it all together and realized... crap... i don't have a power button. never fear! i shall make one. so i got a staple, bent it in half, and put some tape on it. shorted the two jumpers that the power button hooked up to and it came alive. that worked alright, but i also had this 1/4" to 1/8" adapter. I tried it because I lost my staple and it worked much better (better contact = less fidgeting trying to get a connection)

installing windows... couldnt get the cd drive out of this old dell so i just hooked it up close by

my wonderful i/o plate

the goodies

it's current resting place. runs a bit warm (CPU is ~45*C under mediumish load) so i'm not going to run it much until I get a chance to get those 80mm fans.