Probs with older rig...

jbmx4life

2[H]4U
Joined
Oct 14, 2004
Messages
2,550
I am trying to get a hard drive to work in one of my older systems so that I can use it downstairs as a back-up or fvck around machine. Problem is that the motherboard won't detect the hard drive (Western Digital 7200RPM 40GB). When I have the BIOS set to "AUTO" "AUTO" to detect the harddrive it just hangs on the POST screen while it is looking for the drive or F4 to skip. F4 does nothing and I can only get into the BIOS no matter how long I let it sit. If I set the BIOS to "USER" "AUTO" then it bypasses the hard drive detection and finds the optical drive but still hangs. I tried the drive on another system to make sure it was OK and that went fine. I put the 10GB drive that I took out back in and that went fine, so the cable is OK. I just don't understand why this is happening.

Rig:
P3 450 @ 504
B687 motherboard (WTF?)
256mb of PC100 RAM
 
If it is a brand new drive there is a very slight possibility that the mobo does not recognize it. Maybe you will need to update bios, but leave that as a last resort.
 
If it is a brand new drive there is a very slight possibility that the mobo does not recognize it. Maybe you will need to update bios, but leave that as a last resort.

It's 40gb. That puts it circa 2000, which should be in the same era as a p3 450.
 
Your motherboard manual can be found here if you need it:
http://www.elhvb.com/mboards/procomp/manuals/list.html

The IDE interface is only DMA33, so you may want to try using a 40pin IDE cable as opposed to an 80pin (if you are currently using an 80 pin). Make sure the harddrive is jumpered for master/single. Also, try the harddrive in another system to make sure it is good if those things aren't the issue.
 
what are the jumper settings set on for the hard drive?

I have NO jumper in it as that is the Single/Master setting for a Western Digital.

If it is a brand new drive there is a very slight possibility that the mobo does not recognize it. Maybe you will need to update bios, but leave that as a last resort.

Well if the motherboard needs a BIOS update to recognize it then I guess that I would be SOL because of its age and the company it was made by (ProComp Informatics LTD?).

It's 40gb. That puts it circa 2000, which should be in the same era as a p3 450.

Actually the Drive was made in '04 and is still under warranty til 6/6/07. :D

Your motherboard manual can be found here if you need it:
http://www.elhvb.com/mboards/procomp/manuals/list.html

The IDE interface is only DMA33, so you may want to try using a 40pin IDE cable as opposed to an 80pin (if you are currently using an 80 pin). Make sure the harddrive is jumpered for master/single. Also, try the harddrive in another system to make sure it is good if those things aren't the issue.

I tried the drive on another system to make sure it was OK and that went fine. I put the 10GB drive that I took out back in and that went fine, so the cable is OK.

Thanks for the advice but please read the entire first post next time. :rolleyes:

Thanks for the motherboard manual link too. I forgot to mention that for some ungodly reason I actually have the original manual.... weird. Motherboard manual doesn't actually have any useful information to it at all. Basically just BIOS settings.
 
Yeah, but the 10gig is most likely DMA33 as well. Whatever :rolleyes:

OK I get what your saying. I'll have to check out whether I got a 40 pin or 80 pin cable in there. Didn't mean to seem like I was trying to jump your shit or say that your wrong. Sorry.
 
well I checked it last night and there is a 40 pin cable already in the system and it is verified working with another hard drive.
 
OK I got this problem figured out and under control now.

I was searchin around the net this morning and happened to stumble upon a BIOS for this motherboard that allowed 32GB, 64GB, and 128GB+ hard drives to be recognized. I guess this wasn't included in the original BIOS since the motherboard is older. The last official release that I could find was dated 1999. I got the rig up and going now and W2K is being installed as I type.
 
Well on to my next problem now....

W2K install went fine but then when it rebooted to finish the install , all it said was "Error Loading Operating System". I tried changing a few things in the BIOS but that didn't change anything. What do I try from here?

HELP!!!!:mad:
 
Did you do a full format of the harddrive when you did the OS install or did you use an existing partition?

Also, you could try running chkdsk /mbr from the recovery console from the 2k CD. There are also a couple other commands fixboot and fixmbr that may need to be run. More info here:
http://web.ukonline.co.uk/cook/console2.htm
 
Back
Top