• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Problems with SATA recognition

T

T-Badger

n00b
Joined
Apr 3, 2005
Messages
27
I just recieved an 80GB Western Digital SATA HD and I installed it and it seems to be recognized as a external hardware device and does not show as a hard drive in the computer's menu. I'm using a GA-K8N-Ultra9 Mobo and I have the drived plugged into the Sil3114 ports along the bottom of the board.

Any suggestions ?
 
Start > Settings > Control Panel > Administrative Tools > Computer Managment > Disk Management.

Then create a partition on the new drive.

It will still show up as a removeable device (because SATA is Hotswapable), but that is how you get it to show up in My Computer after Device Manager finds it.

==>Lazn
 
I tired that and the SATA drive isnt even listed. It seems to only be recognized on inital boot when it asks about RAID configs. After that it never appears again ? should i have it plugged into a certain slot or something. I bought it OEM so it didnt come with instructions or drivers. But i supposedly have all the SATA controllers and drivers that came with my mobo.

P.S. -this drive is meant only for storage
 
Does the Sil3114 show up in Device Manager?

Even if it does, go to the website of your MB MFG and download the latest drivers for it, and give those a try.

==>Lazn
 
Reflashed the Bios and everything seems to be working. Had to set up the drive in the RAID array as JBOD to get it to recognize as a HD
 
You must log in or register to reply here.
Back
Top