• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Problems after O.C

M

MADWAD

n00b
Joined
Mar 8, 2005
Messages
52
It seems i have a little problem... When i turn on my computer it stops while it's booting and Says "Hardware Monitor found an error- press f1 to continue/del to open BIOS" This happens everytime i turn my computer on and when i do press f1 A crazy computer voice comes out of my speakers and says "booting from operating system"???????????????????? When i go into Bios and select hardware monitor- everything looks normal but Chassis Fan Speed says 1577 RPM and it's in highlighted in Red.??? Whats the deal??? Any suggestions?

BTW - this started happening in the process of O.C my cpu i increased the voltage and caused the computer to "Freeze Up". I changed the voltage back down (.05) and my computer boots except i get the problem mentioned above.
 
The red is telling you that your fan's RPMs are too low, and that's probably the Error that it's reporting. See if you can change that fan's monitoring to "Ignore", usually by either hitting the + or - keys on the numpad or by hitting enter when you select that fan and switching it to Ignore. See if that makes it go away.
 
Ok......so now my computer is not letting me into BIOS Instead when i turn it on this crazy sounding voice comes out of my speakers saying "booting from operating system". Then it goes right into windows without giving me the option of opening BIOS. Anyways i'm lost on what to do.........any advice or info would be greatly appriecated. Thanks in advance
BTW - i turn the fan speed to ignore before this all happened. (how bad can a fan speed problem be, right?)
 
You may have to remove the Battery for the Bios and switch the jumper to reset it. It will put everything back to default.
 
You must log in or register to reply here.
Back
Top