Problem with Wi-Fi router

blingbling

n00b
Joined
Jun 29, 2009
Messages
48
Hey guys...so my problem is whenever i connect my D-link router with my modem the lights turn on but it doesn't exactly work.What i mean is i can use the internet on my pc perfectly fine with my regular modem.But when i connect my wireless router.Neither do i get wifi singals on my phone nor do i get internet access on my pc.All the lights on the router and modem and on like usual.Any solution? tnx in advance :)
 
Hey guys...so my problem is whenever i connect my D-link router with my modem the lights turn on but it doesn't exactly work.What i mean is i can use the internet on my pc perfectly fine with my regular modem.But when i connect my wireless router.Neither do i get wifi singals on my phone nor do i get internet access on my pc.All the lights on the router and modem and on like usual.Any solution? tnx in advance :)

I would update the firmware on the router with your computer direct wired to the router, then re-configure it. If it still act's up after that well, time for a new one maybe ?

whats the model on it ?
 
you say you get no wifi signals...
do you mean that you don't see your wireless SSID that should be coming from the DLink?

is this a new DLink? have you tried resetting the router to defaults (usually has to do with holding in the reset button on the back of the router) to verify it hasn't been previously configured?

when your PC is plugged in to the DLink, do you get an IP from it?
what kind of IP do you get when you plug straight into your modem? Internal (192.168.x.y or similar)?
 
1. Yes i do not get a wireless ssid on my phone and all other devices
2. its a year old.
3. i set it to default
4. when i go to windows network sharing it says im only connected to a local network and NOT the internet.ipv4-local .ipv6-limited
5.howd i check my ip>?
 
Start -> Run -> cmd
from command prompt, type:
ipconfig /all
 
strange...
ok, so if you go to Start -> Applications -> Command Prompt
I believe

or just hit Start then start typing command prompt and it should list it.
 
ok.. so then you should be able to access the router's web interface.
I would log in to it and verify the all settings are at default. Possibly upgrade the firmware if there's a newer version available.
 
k its like 192.168.a.b :)

is it 192.168.0.x or 192.168.1.x ?

when you do a ipconfig / all you will get something like this,

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::4167:9245:b403:5028%15
IPv4 Address. . . . . . . . . . . : 192.168.2.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.100

See where it says, default gateway, take that ip address and throw it into a web browser like this.

http://192.168.2.100 then you will see a webpage pop up it will ask for the username & password, if you just factory reset it then you will need to read the manual from dlink and see what it is, most lily it will be username : admin Password admin

OR the password filed will be blank.

j'
 
well theres no wireless lan adapter only Ethernet...btw my pc doesn't have w-lan...wanted to use da internet off my router for my phone and @ dashpuppy i tried it but uhh..it doesn't work when i plug in my router cause it requires an internet connection :(
 
well theres no wireless lan adapter only Ethernet...btw my pc doesn't have w-lan...wanted to use da internet off my router for my phone and @ dashpuppy i tried it but uhh..it doesn't work when i plug in my router cause it requires an internet connection :(

I'm confused, what doesn't have a wireless adapter ?

You can still access the router if there is no internet connection, in fact it doesn't even matter if its plugged into the modem or not.
 
Go into your browser and type in whatever the gateway ip is. That will get you to to your gui for the router. From there you can program it.
Posted via [H] Mobile Device
 
Go into your browser and type in whatever the gateway ip is. That will get you to to your gui for the router. From there you can program it.
Posted via [H] Mobile Device

we have already posted that many times to him!
 
Back
Top