Problem with my raid setup

[neokeelo]

I am using Drive Xpert to setup a raid 1 but after the software rebuilt the array and verified and i restarted my pc it started doing it again. Does this mean something is messed up with the drives? Should I switch over to the intel raid option? Also I tried running HD tune while it was rebuilding the array but im getting tons of failed columns. Is this just due to the array being rebuilt while hdtune is monitoring it or are my drives broken?

 

[Raap]

I've had similar problems, where I had to re-verify my raptor raid0 array all the time( using intel raid ). I eventually got rid of the problem by reconnecting all my hdd-cables, then re-verifying again and running chkdsk /f on the raid0 drives.

 

[neokeelo]

after unplugging the drives and using the regular sata ports they both worked fine, ill try switching the ports on the 2 orange and white Drive Xpert ports and see if that helps, otherwise I'm going to try the Intel raid software.