Problem with Gigabyte Board

freddursth8

Weaksauce
Joined
Jan 8, 2004
Messages
116
Ok, my roommate popped in his new Gigabyte K7 Triton motherboard (thats the first problem if you ask me) and hooked up his video, ram, processor and power. The light goes on on the board, but there is no video feed to the monitor. The fans begin to spin too. We are certain the video card and processor are working cuz we tested them on a seperatate computer. We also cleared the BIOS. Any thoughts? Thanks! :confused:
 
freddursth8
What power supply are you using with that board?, and per the label on the psu, what does it say the outputs are for the 12v, 5v, and 3v outputs?

Did you plug in the 12v, 4pin power connector as well as the atx power connector?

What brand of ram, how much, and what slots?

Did you recognize that the cpu socket is rotated 90 degrees, and many have put the hs on backwards.

Specifically which board?
Here is a Gigabyte New Owners Guide

Laterz,
dafanman:cool:
 
Yes, the 12V and the atx power cables are conencted :p

Its crucial, pc2100, ddr, 256 mb.

its the ga-7n400 pro2 board

thanks
 
freddursth8,
No problem:)

I would pull the board from the case and bench test, with the bare min of components.

Check this vid Socket A HS Install Video and make sure that the socket ledge and the hs ledge are lined up, the thermal shutdown will not allow a startup if not on correctly, additionally you might try a diff hs/fan combo if you have one avail in case the fan header is somehow goofy.

If you still have problems give my boys a holla over at Amdmb Gigabyte Forums Lots of good experienced giga users there, tell them "MOM" sent you and they will take good care of you..

Laterz,
dafanman:cool:

Oh yeah, what about the psu info?
 
yeah, dude. we just figured out that its the heat sink fan. since the board cant detect it, it wont boot. Thanks.
 
freddursth8

Good to see that you got that nailed down:)

Now on to bigger and better things.

Good luck

Laterz,
dafanman:cool:
 
Originally posted by freddursth8
yeah, dude. we just figured out that its the heat sink fan. since the board cant detect it, it wont boot. Thanks.

Good you got it fixed.

PS: Gigabyte boards are solid, especially the ones with intel chipsets!!
 
Back
Top