Problem with case and motherboard help!

[Sewy18]

hey I installed the motherboard perfectly into my antec 900 case.Except the screw holes on my pci video card and sound card don't line up properly with the case holes.Link to picture of problem..

http://s305.photobucket.com/albums/nn207/sewy18/?action=view&current=Picture001.jpg

If I push in the back of the case slightly then the holes line up properly,but my question is,is it normal for this to happen or did I do something wrong? Will it put to much pressure on the pci cards if I push in the back of the case slightly and screw it in?

Thanks for the help..

 

[133]

i think this is common and it will be ok if you push it a little.

 

[silent-circuit]

Loosen the screws holding the motherboard down and press it nearer to the back to the case, then tighten them back up. No more problem.