Problem accessing drives in device manager after highpoint card

Adidas4275

Supreme [H]ardness
Joined
Mar 11, 2006
Messages
5,986
Okay so I have a strange problem.

I was running a raid 5 array on a HP 2220 8 port SATA card. I deleted the array today (on purpose). Now I want to use that drive in another computer, but when I plug the drive into another computer it isnt recognized in the BIOS. It is recognized as just a SATA drive, no model number or size or anything.

when i plug the drive back into the high point card it works fine, i can create an array on the drive and access it in drive manager no problem.

It is giving me an i/o error when plugged into the motherboard.

any ideas?
 
If it happens to be a Western Digital drive, it's a known problem if you have staggered spinup enabled, as it permanently screws the drive over and it will only spin-up when connected to the Highpoint card. (That's why it doesn't get detected outside of the Highpoint). If you want them to work outside the Highpoint card, it's RMA time. My WD 640GBs were affected by this Highpoint staggered spinup bug and I ended up RMAing them.
 
suck face... well atleast they are under warranty.

WD7500AAKS 7 of them :(

shipping is going to suck!!!!!!!!!!
 
Back
Top