• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Prime95 gets error when starting

T

techtips

Gawd
Joined
Jan 3, 2011
Messages
530
Hey everybody, I have installed a Noctua NH-U12P SE2 into my LGA775 E8400 desktop yesturday and it's been a great improvement so far.

I am currently at 3.81ghz with the E8400 and my temperatures are around 46-48 degrees celcius, which I know is a bit high and that is all due to the automatic setting of the VCORE. I need to manually set the vcore and temps should go down a bit.

Now, when I try to run Prime95, Blended Torture test, I get this message.

3129f146.png



Any ideas what could be causing this?
 
are around 46-48 degrees celcius, which I know is a bit high
Click to expand...

It may be high for that cooler however those are not at all high or a reason to worry for a CPU designed to run at up to 100C.

Any ideas what could be causing this?
Click to expand...

I would start by backing off of the overclock and see if the problem goes away.
 
The overclock is unstable. It either requires more voltage or some other setting needs to be tweaked.
 
You must log in or register to reply here.
Back
Top