Ok, I just bought a 2.8E with Corsair Value 3200, 2.5-3-3-7, 5:4 with Iceburg Copper Heatspreaders(yea I chould have gone higher but money saving is my 1st priority). As of now I'm at 3.2C (1.41v) and ram @ 2.7v. My HSF is a Gigabye 3D cooler. I'm on an Abit IC7-G MaxII. If I clock to 3.3-3.6, hardware fail within a minute in Prime95, and I've adjusted up to 1.51v. Where could my hickup be? My temps are 48 idle and 63 load @ 3.2, at 3.6 idle was at 58 and load 69. I can't imagine its the ram since the FSB @ 5:4 for ram is only 183. Remeber Abit boards list 5-10 degrees higher.
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Prescott OC Stall
- Thread starter PacFu
- Start date