Premeditated Overclock (165)

Joined
Dec 12, 2005
Messages
60
Hello All,

I have been out of the computer loop for the past 6 months, and I am impatiently waiting for my new 165 from Dave.

To round out the system:

ZALMAN CNPS9500 LED 92mm 2 Ball Blue LED Light Cooling Fan with Heatsink - Retail

ASUS A8N-SLI Premium Socket 939 NVIDIA nForce4 SLI ATX AMD Motherboard - Retail

mushkin eXtreme Performance 2GB (2 x 1GB) 184-Pin DDR SDRAM DDR 500 (PC 4000) Unbuffered Dual Channel Kit System Memory Model 991483 - Retail

Seagate Barracuda 7200.9 SATA NCQ 3Gb/s ST3160812AS 160GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM

eVGA 256-P2-N516 Geforce 7800GT 256MB GDDR3 PCI Express x16 Video Card - Retail

I am premeditating my overclock. I would like to get a 300 HTT out of the ASUS, and I would like to run a 5:6 divider, putting the ram at 250 Mhz, and the Opteron at 2.7.

I have 3 days to sit at work and daydream / bullshit about this... Do you guys think I have a solid chance at making this dream come true?
 
better to think about your lowest probable clock. which is about 2.4, even with the worse steppings. if u get a good one 2.7 is easy.
 
I thought hard about the DFI NF4 Expert, But it would have cost me $40 more over the Asus. Plus, the DFI requires a 24pin power plug, which my 400W Antec Ion does not have.

My Antec Ion was $90 about a year ago, it is a solid power supply, should it concern me with this overclock?
 
kemist1117 said:
I could be way off but i thought that mobo wasnt great at hitting high HTT?

If you want to hit 300, don't get the Asus. My asus doesn't do 300.
 
chemist_slime said:
If you want to hit 300, don't get the Asus. My asus doesn't do 300.

Whats your HTT multiplier? I've seen many ASUS A8N-SLI Premium's hit 300+ by dropping the HTT multi to 3x.

I'm not discounting your experience though.
 
I'd research the asus premium to see if it can do a 300 ht, check out the hard and anand articles on it.

Personally, you sound like me in wanting a way above normal oc for the cheap, I can only recommend what I have and thats the dfi ultra-d. You can mod it to sli if you need it, which you don't by your specs, you will get headroom above 300 ht, mines fine at 300x9, never tried higher though as I run daily at 280x10.

Asus does have the passive element going for it, but your cpu fan won't help cool the heat pipe off the chipset so don't oc any element off the chipset and it'll be fine.

I've found that while my chip will prime fine 2.8ghz @ 1.45v it is not stable until I give it 1.5v by the probe and cpuz. Set to 1.525 in bios or 1.4 @ 110% so make sure the asus can do voltages that high and cleanly. When oc'ed that much the chips become very susceptible to voltage fluctuations and the motherboard and psu become supremely important.

Put it this way, if you owned a dfi board, and tried to get support from dfi on their forum, they would tell you your power supply is not up to running their boards. :(

Sorry this is out of order and random just sharing the advice of the months I spent researching my christmas toy.
 
seachus said:
Personally, you sound like me in wanting a way above normal oc for the cheap, I can only recommend what I have and thats the dfi ultra-d. You can mod it to sli if you need it, which you don't by your specs, you will get headroom above 300 ht, mines fine at 300x9, never tried higher though as I run daily at 280x10.

I read somewhere that DFI changed their manufacturing process a tad and now it's become almost impossible to mod for SLI.
 
seachus said:
I'd research the asus premium to see if it can do a 300 ht, check out the hard and anand articles on it.

I did, and this is what I found on Anandtech .

seachus said:
Asus does have the passive element going for it, but your cpu fan won't help cool the heat pipe off the chipset so don't oc any element off the chipset and it'll be fine.

Can you explain this to me... Are you talking about the PCI-e Bus and stuff like that? Or the HTT Bus?

seachus said:
I've found that while my chip will prime fine 2.8ghz @ 1.45v it is not stable until I give it 1.5v by the probe and cpuz. Set to 1.525 in bios or 1.4 @ 110% so make sure the asus can do voltages that high and cleanly. When oc'ed that much the chips become very susceptible to voltage fluctuations and the motherboard and psu become supremely important.

Put it this way, if you owned a dfi board, and tried to get support from dfi on their forum, they would tell you your power supply is not up to running their boards. :(

I agree with you, and I am alittle nevous about my PS, but I hope that a Strong 400w is better than a crappy 500W... :(


seachus said:
Sorry this is out of order and random just sharing the advice of the months I spent researching my christmas toy.

Thanks for this post, it has been very informative... I figure I'll make it to at least 2.6 or so, does replacing my PSU and investing in the DFI worth the "potential" 100-200 mhz... :confused:
 
You can still mod the Ultra-D, you just have to remove the HSF from the chipset. Easy as pie.
 
You need to upgrade your PSU too. I'm surprised no one has said that yet, or maybe I'm not
 
skip the DFI or the Asus
Get a Epox 9NPA+SLI

Also I would SERIOUSLY suggest a new PSU.
 
The asus sli dlx mb I had did 375htt....though not every piece of hardware is the same.
Even the asus dlx/premium have a 24pin atx plug. I 2nd the opinion to invest in a good psu. You're building a Ferrari and expecting top speeds, but you're powering it with a 3 cylinder chevy sprint motor. The asus will run ok on a 20pin plug, as well as the dfi might, but expect random reboots and lower oc's until you get a 24pin psu. I highly recommend the Hiper 580w psu as well as the OCZ Powerstream 520 (Compusa has the lowest price I've seen on this). Both are extremely great psus for a very good price.
 
Obligatory, "BUY A NEW PSU!!" comment. :p :p


EDIT: Damnit! That's what I get for middle clicking my a$$ off in the morning and replying later that night...
 
I just built a computer for my friend using this cpu. Let me tell you it is one hell of an overclocker if you have a proper PSU. To be exact 1ghz overclock. To top it off I was using the ASUS A8N-SLI Premium. HTT at 4x and FSB 312mhz. The video card is a evga7800gt. The dual core cpu draws more power than normal chip and the video card doesnt help the situation with the psu much. Hence why I mentioned that a good psu is essential to a sucessful overclock.

The psu I started off with is a pretty good unit already, but apparently it wasnt beefy enough. The one I started off with was a OCZ ModStream 450W. This is a very good unit already, but it wasn't sufficient....when I say insufficient I am saying that in terms of a overclock to stable 2.5ghz. Next I moved onto a 550W of the same OCZ ModStream and the computer was stable at 2.8ghz running loops of Q3 and COD2 for a day. So, I guess you can count this to be a stable system :p I didn't run prime, but that computer is going to be used for games only so I thought the test I ran were good enough.

BTW: The computer POST'd at 3ghz but I could not get into windows. I could of probably inched out a bit more than 2.8, but I just left the OC at a good flat number. Give it a bit of headroom rather than have it at the borderline since this will be my friends computer.
 
Advice taken.

I have a CoolerMaster Case, and since I will have all the parts in one place before I get a new PS, I will put it together and see how it works.

The PS will be top on my list for replacement, when hitting the wall, and it's an easy switch-out. Gotta love the design of those coolermaster cases. (I wonder if the Zalman will clear the case when sliding out with my pullout MB tray...)

I know the PS as a component should never be neglected, I guess I'm just dissapointed that last years decent PS is this years crap.
 
captaincaveman said:
...I guess I'm just dissapointed that last years decent PS is this years crap.

Well for starters, what's the PSU. Antec 400 what? Second, it's not really "this year's crap." Perhaps a simple HDD addition or some other change would not neccesitate a ps upgrade. When you update as much of a rig as you're doing, the psu needs a bump too. Not only that, you're also trying to oc the rig, right? That's where the strong psu comes into play. Even a small difference in psu quality can turn the tide. For example...

I had a 430 watt Chieftech PSU (Made by Antec or the other way around, I don't remember) powering my Athlon 64 3000+ and a 6800GT. I could oc one or the other, but not both or I'd crash. Upgrading to the Antec TP550 gave me enough juice to push both farther simultaneously. :)

Good luck\!
 
http://www.jscustompcs.com/power_supply/Power_Supply_Calculator.php?cmd=AMD

When plugging in all the info i have on this rig, I end up with about 375 as the recommended minimum.

example:

2 DVD Drives
1 HD
all sorts of USB
4 case fans
7800 (i put in the 6800GT)
I even included a PCI that I do not have yet... and figured a 110w proc... not 85

This makes me feel better about running the system on the powersupply. It's a powersupply that is known to be solid (in it's day). So I'll see what kind of mileage I get with it.

I'll keep an eye on it though.

For Reference.
 
I built the Computer on Thursday. Didn't have a chance to play with the overclocking until Monday.

The lid:

OSA165DAA6CD
CCB1E 0550VPMW
138779AL50127

(Thanks Dave!)

Stable overclock (Prime 5+ hours):

300 x 9 = 2.7 @ 1.425 v
Memory = CPU /14 = 193
Timings = very loose

The interesting thing is the Temperatures. At Idle, the temps are 37 - 40 C

When playing games it levels out at 50 C.

Running Prime95 the cores flatline at 60 C.

Although at 60 C at load, I feel very comfortable with this overclock... I'm wondering if my thermal sensor is incorrectly calibrated. Is there a way to test this?

Also, the Asus BIOS is screwy. If I specify the CPU FSB and Multi, I cannot pick my ram divider...(well, there is no option for ram divider, just DDR rates) I want to run at DDR500.

Can anyone speak to my temperature issue? Is it unwise to run like this? I mostly game, and 50 C is not so bad. Mainly the jump from 40 -> 60 (Idle to load) has me stumped.... thats quite the spread.

Perhaps I need to reseat the Zalman?

:confused:
 
Excellent news...I have the same chip from another forum member on the way. Who also purchased from Dave. If I can hit 300x9 with my memory 1:1 (OCZ VX PC4000), I will be quite pleased.
 
I feel this is a very strong overclocker, but I am still interested to hear opinons about my temps...

I covered the IHS with a THIN layer of AS5 before applying the Zalman. I've heard about using a rice sized dab, and letting it smoosh out.

Would having to much artic silver cause these temps? I'm under the impression that AS5 is a GOOD thermal conductor...

Any comments?
 
I use barely enough to scrape accross the surface, it's only needed to fill in any imperfections in the heatsink surface. You don't need alot at all just enough to barley cover the surface. Also if u do use alot and let it "smush" out, it could go out too far and also not cover the entire surface area of the heatsink in contact. but all in al u really woln't see that much of a difference lol. maybe a few degrees :p
 
Those temps seem a lil high, but the delta sounds about right.

my compy idles between 20C and 22C (right now during winter) and a couple mins of dual prime later it stablizes out at 38.xC. I got it over 40C once with a hair dryer blowing hot air in, but my cpu cooler keeps the cpu cool. I have case ventalation issues but that is being solved with some hacksaw action this weekend.

So a 20 degree delta sounds about right for a dual core opty, but I'd look into your heatsink mount / paste application and check your power at the wall to see how much you are drawing. Remember your processor at 2.7 is probably pulling alot more juice than you think or it would at stock 1.8. Tech Report and anand articles on the FX-60 both give power readings for idle and load. They use different systems and don't define load as being cpu load only or full system load but they add 50 - 100w of system power consumption. Our processors likely need more power because of higher voltage and higer clocks so like I said check your system at the wall idle and load. Power meters are cheap at radio shack or home despot. I got a 600w power supply because one thing you should never cheat on is power, things run way hotter when power is streched or at the limit.

Also that 110w number you quoted earlier for the processor is the wrong wattage. There is a difference between thermal wattage and power wattage, the 110 you quoted is a thermal wattage.
 
Ok i got to testing my 0550vpmw last night, here's what i got so far.

I'm running 295x9 at 1.45 volts. It's been stable for over 4 hours now, i'll check on it when I get home.

I'm pretty sure I can hit 300x9 at 1.45 but I keep failing prime even at 1.50. My pwmic is hitting over 70C when i'm at 300x9 so I'll test later this week again once I get more gear.

If I can't hit 300x9 at 1.5 i'll take off the lame IHS and see if I can hit higher. Temp on the CPU is probably not the issue, i'm dual priming 295x9 at only 41C fully loaded (water cooled btw).
 
My temps don't go over 40c under full load on water and thats with the heater going in my house lol. Also my PWMIC seems high too. 57c+ under full load after priming for a few hours. Thinking about putting a nice quiet little fan over my mem and those mofsets just to help circulate heat abit more. Dunno how much it'g going to help tho i hear its really not a factor in an OC tho.
 
well i finally braved it. I removed the IHS tonight. It's not as bad as people say, I used a regular razor blade just cut into the CPU until it got a little lose on all edges, then used flossed to sever the glue.

Tommorow I should get more tubing for my case, I'll do further testing this weekend.
 
SoCalDJ said:
My temps don't go over 40c under full load on water and thats with the heater going in my house lol. Also my PWMIC seems high too. 57c+ under full load after priming for a few hours. Thinking about putting a nice quiet little fan over my mem and those mofsets just to help circulate heat abit more. Dunno how much it'g going to help tho i hear its really not a factor in an OC tho.

Once my pwmic started getting to 50-51c I threw in another 120mm fan to blow over the mosfets. It also helps cool the ram abit too, not that it runs hot. Pwm temps dropped to 38c. I use the same typ of 120mm fan to blow over the chipset....pretty much all my load temps are 38c across the board now.
 
With all this "popping of the lil guy" do we need to be concerned with crushing the core when using heatsinks such as the Ninja from Scythe or the Thermalright xp120? :confused:
 
prophetx2 said:
well i finally braved it. I removed the IHS tonight. It's not as bad as people say, I used a regular razor blade just cut into the CPU until it got a little lose on all edges, then used flossed to sever the glue.

Tommorow I should get more tubing for my case, I'll do further testing this weekend.

good luck with the overclocking
 
I have an update as well.

I caved in and bought a 600w PS (I would consider it a solid 500w).

I noticed that while on my Vantec Ion 400W, if I put both cores under prime, the pitch of the case fans would actually change. I figured that was a sign.

With the new power supply, this symptom does not occur anymore. So I went ahead and attempted a higher HTT on my Asus Premium.

Before the PS switch, I topped out at 310 with a reboot. This time I top out around the same range, but with an error in prime (one core), not a reboot. Cranking it up to 315 gives an error in both cores. So no real gain.

I also pulled off my Zalman, cleaned off the AS5, and used the "rice-smoosh" method. It had little effect. My streamlined PS cables may account for the 1-2 C drop in temp.

My OC stands. 9x300 = 2.7 ghz. @ 1.425 v in BIOS (Reads 1.45 v in windows, what gives?)

/end update.
 
captaincaveman said:
I have an update as well.

I caved in and bought a 600w PS (I would consider it a solid 500w).

I noticed that while on my Vantec Ion 400W, if I put both cores under prime, the pitch of the case fans would actually change. I figured that was a sign.

With the new power supply, this symptom does not occur anymore. So I went ahead and attempted a higher HTT on my Asus Premium.

Before the PS switch, I topped out at 310 with a reboot. This time I top out around the same range, but with an error in prime (one core), not a reboot. Cranking it up to 315 gives an error in both cores. So no real gain.

I also pulled off my Zalman, cleaned off the AS5, and used the "rice-smoosh" method. It had little effect. My streamlined PS cables may account for the 1-2 C drop in temp.

My OC stands. 9x300 = 2.7 ghz. @ 1.425 v in BIOS (Reads 1.45 v in windows, what gives?)

/end update.

It could be your mb either overvolting or your sensors are incorrect. Mine typtically undervolts but I'm not sure by how much until I get annoyed enough to buy a voltmeter. Cross your fingers with me guys, i'm hoping to do a bit better with out a leaky system and without the IHS.
 
Jodiuh said:
With all this "popping of the lil guy" do we need to be concerned with crushing the core when using heatsinks such as the Ninja from Scythe or the Thermalright xp120? :confused:

not sure..i'm using a water block so i can adjust my tension fairly easily. My xp chip didn't have anything helping it out. How would a chip actually 'crush'? Is that even possible? Has someone done this before?
 
captaincaveman said:
I have an update as well.

I caved in and bought a 600w PS (I would consider it a solid 500w).

I noticed that while on my Vantec Ion 400W, if I put both cores under prime, the pitch of the case fans would actually change. I figured that was a sign.

With the new power supply, this symptom does not occur anymore. So I went ahead and attempted a higher HTT on my Asus Premium.

Before the PS switch, I topped out at 310 with a reboot. This time I top out around the same range, but with an error in prime (one core), not a reboot. Cranking it up to 315 gives an error in both cores. So no real gain.

I also pulled off my Zalman, cleaned off the AS5, and used the "rice-smoosh" method. It had little effect. My streamlined PS cables may account for the 1-2 C drop in temp.

My OC stands. 9x300 = 2.7 ghz. @ 1.425 v in BIOS (Reads 1.45 v in windows, what gives?)

/end update.

nice oc and its at good voltage too
 
prophetx2 said:
not sure..i'm using a water block so i can adjust my tension fairly easily. My xp chip didn't have anything helping it out. How would a chip actually 'crush'? Is that even possible? Has someone done this before?

I'm pretty sure the ninja has screws, so that should be ok. But the xp120's has clips...

I worked at a ma and pa repair shop during the "athlon xp" rage and we had quite a few "avg joes" crack their cores. We actually had a chipped barton runnin' in one of the test beds for a year, lol!

I'm just not sure I wanna take that risk on my new 170.

*get here already!!
 
I just got my 165 in (CCB1E 0550 VPMW, newest stepping) (replacement for my 4600+, that I sold), and it does 2.8 @ 1.4V. 35C idle, 44C load. Under a Zalman 7700cu. Also, the memory controller seems to be MUCH better than my X2's also. I'm running some OCZ GOLD VX PC4000, on the 4600+ would only do 250 @ 2.5-4-4-10 2T. On the 165 does 255 @ 2-2-2-5 1T.

However, I can't seem to get these bastard DIMMS to run 1:1, no matter what voltage I shoot through them. 3.6V = 265 top out. Grrr. Still better than the X2, but damn. Nice timings though. Perhaps I should give some TCCD a try as these are BH5's.
 
Wow everyone is doing so freaking damn good with these chips! Last night i tried running 300x9 (2700)@1.43 (bios) and it failed within the first 2 hours. I've been running CPU burn for the last 4 hours now and hopefully it'll break in the new chip a bit.

Anyways, removing the IHS and putting a fan over the PWMIC helped me a bunch. With two cores FULLY loaded using cpuburn for 4 hours straight, i was barely touching 43C on the CPU and 45C on the PWMIC. THis is MUCh cooler than with the IHS. I think i was getting the 43C with just prime alone on a lower clock/voltage.

As far as cracking the chip, i put alot of pressure on teh chip b/c previously the waterblock didn't touch the core and I don't see any problems.
 
Just ordered one of these bad boys (165's that is). Will get here middle of next week, but will post results... Dammit, I haven't been this excited in a long time.
 
Nice make sure to post your 165 stepping and week too smelley, so we know what that week is capable of :D
 
Back
Top