Power external enclosure with PC PSU

Ensign.Fodder

[H]ard|Gawd
Joined
Sep 1, 2005
Messages
1,092
I know that the power bricks that ship with external drives are simply providing 5V and 12V power so it seems I could modify the cable to accept a standard IDE molex. The reason I am trying to do this is I have several old HD's in enclosures that have old pictures, OS images, crap I cannot delete, but I do not want to have them in my case, and I do not want to have 5 bricks plugged in all the time.

I know someone has the knowledge and I am sure I could hack this out but life and family are a bit much now.

Thanks for any help.
 
You could pull the drives and use one of these.
http://www.newegg.com/Product/Product.aspx?Item=N82E16822999161
or this if you can find one in IDE(assuming the older drives are IDE)
http://www.newegg.com/Product/Product.aspx?Item=N82E16817707127

I'm still having trouble figuring out how making an external enclosure take a molex connector would save you time or allow you to not have them all plugged in at the same time. Maybe you could elaborate some more.

I would personally just buy a larger external drive and move your files to the new one.
 
I've done it. You need some soldering tools, connectors, wire, and a multimeter. ;) Have fun!

Another option is to simply get one 5.25" external enclosure and use a removable HDD bay inside it, making it easier to switch out the drives. If you're extremely lazy, buy extra drive caddies.
 
I'm still having trouble figuring out how making an external enclosure take a molex connector would save you time or allow you to not have them all plugged in at the same time. Maybe you could elaborate some more.

I am trying to take the external enclosure existing power cord (4 pins around a center block) and modify the end that connects to the power brick (which connects to the wall/power strip) to use a standard IDE molex instead of the brick.

I would personally just buy a larger external drive and move your files to the new one.

Here is a article that talks about doing the same thing.

Link
 
I would personally just buy a larger external drive and move your files to the new one.

Did this - Hitachi Deskstar 7K1000 1000GB Hard Drive - 7200RPM, 32MB, Serial ATA-300 for 109.99 + 1.99 S&H + 7.57 Tax = $119.55
30.00 MIR - M$ Cashback 16.50 = $73.05

Plus the ThermalTake enclosure @ $24.99 + FS - Link

So total $98.04 for 1TB External drive without brick which will eliminate 3 (possible) bricks.

Thanks for the ideas.
 
Back
Top