shadow_419
Gawd
- Joined
- Apr 10, 2006
- Messages
- 602
Thanks for the reply.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
0922APMW here
Biostar TA790GX 128M / Rebels Haven MOD Jan 09 Bios (for HT stuck at 1600)
X4 [email protected]
1.36vcore
1.28v NB (2400)
1.2v HT (2000)
temps limiting my oc, but hey, $100 for X4 955 performance
I installed that BIOS too. Does your system not post if you try to restart from windows with over 1600 HT? Anyway, ,I set NB FID to 2000mhz, then after reboot HT Link Speed to 2.0Ghz, but didn't see my any change in CPU Clock, I thought boosting those added more Ghz to the CPU? I mean doesn't it mean you need less voltage on the CPU for the same overlclock? Is there anyother voltage I need to increase other then the NB Fid and HT Link speed?
I installed that BIOS too. Does your system not post if you try to restart from windows with over 1600 HT? Anyway, ,I set NB FID to 2000mhz, then after reboot HT Link Speed to 2.0Ghz, but didn't see my any change in CPU Clock, I thought boosting those added more Ghz to the CPU? I mean doesn't it mean you need less voltage on the CPU for the same overlclock? Is there anyother voltage I need to increase other then the NB Fid and HT Link speed?
yes, i had to turn off computer from windows, but already warn from its wbsite if im not mistaken
NB and HT are nothing to do with cpu speed/clock and just play with vcore if you want to add stability after you change cpu speed
flo
I am using the same motherboard as you as well, just with an X3 720.
So what is the point of using the mod bios if NB and HT doesn't increase cpu clock?
When you say vcore, do you mean the Core VID voltage under CPU FID/VID Control?
I have gotten then hang of overclocking using multiplier and cpu voltage, but not sure how the NB/HT and other voltages work and what they do.
Is these stats ok? my cpu voltage is 1.18v
Amd II 550 0924BPMW sucessfully unlocked x4 core using
GA-MA790X-UD4P firmware F5.
Story. Mobo came with F5 firmware gave me blank screen. i put in my Amd X2 5400+ in it worked fine re flashed it with F5 Firmware using @bios
2 cores but i turned on ACC AUTO boost the vcore +.100 didnt work so i changed it to HYBRID also and it worked
current voltage shows 1.8 is that good for x4
Hey guys, Just got Mobo last night. Picked up CPU first day Indy Frys had them in stock. Unlocked !!!
Phenom 550 @ 3.3 Air so far # 0921FPMW
Gigabyte MA 790X-UD4P Bios F5a (Thanks HondaGuy )
sorry for small pic !!!
Thanks AMD and Gigabyte for the Quad
guess it's best to just bring the voltage to 1.35 to make to stable cause just right now I tried to so that vista test on my comp it got me an bosd 0.0 and it started to keep restartong when I opened alot of browsers am I the only
one that hate vista x64 I'm about to go back to xp does
any one feel and difference from going x32 to x64?