Post your creative (non-case) mod pics

Joined
Dec 10, 2006
Messages
155
I know this is in the cases section, but it seemed like the best place for some mods.

I posted this stuff over in the ghetto mods section but it was determined that it wasn't ghetto enough for them. Someone suggested creating a thread for interesting, non-ghetto mods, and so here we are. Post em if you've got em.


I'll start with this -

Alright so I have 2 here,

I needed a way to switch between 2 audio sources, and I thought it'd be nice to have some volume control too since one of them was the xbox. I came up with this. The housing is actually milled out of an old PIII heatsink, and the audio jacks are de-soldered from an old soundcard. I did have to buy the pot and the switch for this though. It still works perfectly, but I don't really have a use for it anymore.
IMG_20100811_190830.jpg

IMG_20100811_190820.jpg


So my room kept getting wayyyy too hot (tiny apt room in NY, and I'm from WA) since my graphics card put out prodigious amounts of heat. My solution was to make a cardboard box that would fit over the back of the computer, and pull all of the heat out to be exhausted outside. I have to say it worked beautifully, and painted black it didnt look too ridiculous either. I used some tubing from an old AC unit to vent the air outside.
IMG_20100626_200933.jpg

IMG_20100626_200949.jpg
 
I made a case-matching stand/storage box for my office. I use it to store all of my gaming accessories and external drives. It's also nice to have my case up off the floor.
IMAG0346-1.jpg

IMAG0347-1.jpg

IMAG0345.jpg


Another fun "mod" I did was make a stand for my G27. I chopped up an old tripod to do so. I had to shorten the inner support to your knees/legs could get under the stand. And then I made the mounts for the wheel and shifter out of old level, which are extruded aluminum.
IMAG0637.jpg

IMAG0646.jpg

IMAG0645.jpg

IMAG0644.jpg
 
I like the switch you made. I hate working with aluminum without access to a mill.
 
Does that trip pod on the wheel setup get in the way?
 
Does that trip pod on the wheel setup get in the way?

Nope. As I mentioned, I modified it, cut that middle piece shorter. Your legs and knees go right under it. 2 of the tripod legs straddle your legs, and the third is out beyond the pedals. Works nicely. Can even adjust it down for use on the couch. And it folds up for easy closet storage.
 
Nope. As I mentioned, I modified it, cut that middle piece shorter. Your legs and knees go right under it. 2 of the tripod legs straddle your legs, and the third is out beyond the pedals. Works nicely. Can even adjust it down for use on the couch. And it folds up for easy closet storage.

Heh, nice. I have been thinking about building my own driving cockpit for my ps3 setup.
 
I have a Cintiq 24HD, which if you don't know is a 24" monitor with a pen input screen over it plus a bunch of awesomesauce. Well, my room already gets warm, and now I have this thermal heater plus my auto-sweat feature in my hands. This causes some unwanted screen dirt, so I built this fan to cool off the screen and my hands. I used an NZXT 200mm 166CFM fan, a desk lamp, and a modded 350w PSU.

DSC03065.jpg


DSC03066.jpg


DSC03068.jpg


DSC03069.jpg


DSC03070.jpg

Works great!
 
and looks awesome too! great fan! but fans are contact lenses enemies :(
 
Look "closely" and you'll see the "mod", as well as the irony...

IMG_0013.JPG


It's an eVGA Intel-based System, using an AMD CPU Cooler fan on the Northbridge
[/spoiler
 
Hey, just thought this thread had a lot of potential (some cool stuff here already) and I thought I would try to bring it back.

Keep 'em comin'!

Edit: Figured I should throw my latest project in here.

Came up with my own design to fit my desk just right

IMG_20120919_233406.jpg

IMG_20120919_233442.jpg

IMG_20120919_233500.jpg
 
Last edited:
Back
Top