Post your CPU-Z Database

D

DR_K13

2[H]4U
Joined
Apr 21, 2004
Messages
3,491
Get the new version of CPU-Z

http://www.cpuid.org/cpuz.php#download

version 1.29

download it.

Run it and click the " About" tab then " Validation" follow the instuctions, its real quick, :)


----------------------------------------------------------------------------------------------------------------------------------



Here is one I did lastnight. 1300 Celery OCed to 1605.43 / Cpu = 29c Idle 32c Load
. Air cooled and stable.

http://valid.x86-secret.com/show_oc.php?id=27250

Hey I was bored and ran out of things to tinker with,
 
DarkaneZ28 said:
Pentium 4 3.2E

I wanted AT LEAST a fsb speed of 233 but it's not stable :(

ryuji what vcore are you running at?
Click to expand...
~1.55-1.5725 real volts measured under load
d0's will oc better then a c0
at 1.45v it does 3.8 ghz which is what i have it at right now until my fans come in, the 6800 at 1.4v tipped the scale when it came to heat, the radiator is doing surprisingly well for a dual heater core with only one M1A, can do benching or w/e at 4 ghz, but only lasts a hour or so of gaming before the water gets too hot and it crashes. the cpu crashes exactly when it goes over 65C
cant wait to get my U1C's
 
s478 P4 2.66B @ 3.2

Memory is Kingmax PC-3200 running under stock at 160.

I just realized looking at this that, since my memory is so far under stock speed, that I could probably tighten up the timings a good bid. I'll get to that eventually.


I'm using a TI-something from Thermal Integration with AS-Ceramique. It idles at around 36-40C, loads at about 55C. Sometimes it can approach 60C, and I get a little concerned, but not too much, as I know it can take it. Since it idles so low, I'm thinking a better heatsink/fan could get me into the 40s under load, too. Meh...


Yeah, you probably want the link. Well, here...

http://valid.x86-secret.com/show_oc.php?id=27752
 
Well this is cool, I am really intrested in the L2 Cache Latencies of these chips.. I would like to compare first hand here. Any Help
 
My 3GHz 630 chip @ 4.2GHz on air cooling. ;)

current_cpu_speed.jpg


full specs in case anyone asks:

Lian Li V1000B housing the following:
3.0Ghz 630 @ 4.2Ghz 1.43v (air cooled)
Asus P5WD2 w/ 1GB of PC6700 DDR2
ATi X850 XT - Plextor PX-716A
Audigy 2 ZS w/ Creative S700 5.1 speakers
Antec 480W Neopower - Dell 2405FP LCD
 
http://valid.x86-secret.com/show_oc.php?id=28091
max stable speed. i got it up to 300 fsb but it crashed... *cries*

memory is ocz pc4000 but it is pissing me of. it won't do 2-2-2 timings, period. if i step up the voltage to 3.3 i can get 2-2-3 timings @ 200mhz. i think maybe i need some active cooling to get the speed i know it must have. or it had BETTER have, considering what i paid for it.... *mutters*
 
Hey all, this is my first try @ OC'ing. I've run all the tests (memtest, pi, prime) and everything seems to be good and stable. Any tips or suggestions would be appreciated. Also let me know how it looks for a newb.

CPU-Z
 
You must log in or register to reply here.
Back
Top