Post your AThlon XP overclocks...

I've got a locked Barton 2500+ running at 11*200, stock voltage, running at 1:1 with Corsair XMS 3200
Trying to get it a little higher, but it needs some crazy voltages to get above 2.2 Ghz
 
In my backuop box, the modded NF7-S, iv now got a sempron 2400+ Socket A(basically 256L2 AXP), which has a default 10x166 speed, and iv not got it at 228x10. got it for real cheap and sold the 2500+

its not the board or mem thats limiting me, iv got 250fsb on this one, but the proc just wont go any more, even with 2v it only goes as far as 231x10.

Cooling is only a SLK 800 with a tiiny AMD stock fan. Got the WC and other stuff transferred to the A64 rig.
 
My overclock is in my sig. If I push the bus over 175, it doesn't like to POST. Not bad for a crappy 1700+, though :)
 
I threw a delta 80mm finger ginsu on my slk 800 and when all the way up to 2.6g at 1.85v. on my 2600 xp-m. I normally run it at 1.75v at 2.4g with a medium speed panaflo.
 
PirateNinja said:
I've got a locked Barton 2500+ running at 11*200, stock voltage, running at 1:1 with Corsair XMS 3200
Trying to get it a little higher, but it needs some crazy voltages to get above 2.2 Ghz

ditto
 
got my barton 2500+ up to 11x200, windows was stable, but would fail prime95 after 10mins. now i have it at 11x197, and it's been prime95 stable for 22hrs and counting...my hardware monitor says vcore=1.61V, so that's probably what's holding me back...can't adjust vcore in the bios though.
 
is there like a definitive guide to OC'ing cpu's around here somewhere? I have an fx-55 i'm about to put in, and i wanna experiment with some overclocking, but i don't know the first thing about how to go about doing it
 
I'm just extremely confused on the whole over clocking thing... I mean I have mine over clocked just a little bit.. and I can seem to push it any further.. wondering if its locked or something...
cpus.jpg

I know I have done something wrong so plz try and tell me.. I'm prolly a moron with it or something.. :confused: :(
 
read the guide, then try.

knowing very little(nothing personal) and simply just pushing the fsb up isnt going to help. and a cpu-z screenie with no other details wont help us in figuring out your problem too. give us more details then we can prolly help.
 
Back
Top