Post issues

JeradR

n00b
Joined
Jun 23, 2006
Messages
59
What are some settings to look for in the BIOS that could cause my system to not post sometimes (powerr off/on usually fixes it) and memtest to fail. It's an X2 3800+, m2n-sli deluxe motherboard, cosrair xms2 ddr2-800 1gb. I have the ht link set to 4x, multi to 10x, the speed to 230 mhz, which equals 2.3 ghz. I have the CPU voltage at 1.4, 5 - 5 - 5 - 12 - 2T memory timings, 1.9V on the RAM, DDR800 mode. Any ideas? I would think I should at least be able to do a 300mhz OC :\ There are no heat issues.
 
you have your pc overclocked so it could be numerous things, i would take everything back to stock and see if it still did it when the pc was at stock, just to rule out a hardware problem.
 
Another thing you have to remember as well. Just because So-And-So got that far on an overclock on the same CPU/RAM doesn't mean you will, too.God knows how many steppings are released of hardware, especially CPUs.
 
Back
Top