Possible to get USB 2.0 through IDE?

Ashton

2[H]4U
Joined
Nov 13, 2004
Messages
2,514
I know this is a bizarre question, but I've read about SCSI devices liek scanners and such, and the PC I'm using right now has NO expansion slots (it's about 1' square, and 3" chick) and is so old it's on USB 1.1, which is very slow ehen I'm coppying files to my PDA or external drives. IS itpossible to somehow get a card to interface USB 2.0 to the IDE cable?
 
Yes, I mean teh toher way, heh, I have ~5 HD cases to let me turn IDE drives into USB drives. Though I rather doubt the case can function as a USB 2.0 root, which is what I need...
 
So you want to bundle lots of HDs through a single USB2.0 pipe? there are external enclosures that'll house from 2-4 drives, and interface through usb2.0. the nice ones even feature gigE ethernet ports. I might still be confused. Its before 9am and i'm halfway through this Dr Pepper
 
IDE architecture is WAY slower than even USB 1.1. Even if you can find a way (I don't know of one), I don't think you'd want to run any USB devices through it.
 
IDE architecture is WAY slower than even USB 1.1. Even if you can find a way (I don't know of one), I don't think you'd want to run any USB devices through it.

BINGO! EvilTwinSkippy gets the gold star for figuring out what I wanted to do!

I had always read that IDE drives were a LOT faster than other drives (hene why you cant run a DVD-burner on USB 1.1, but can on IDE), so I assumed the IDE throughput was much faster than USB. thank you, I didn't realize I was completely barking up teh wrong tree.
 
IDE architecture is WAY slower than even USB 1.1. Even if you can find a way (I don't know of one), I don't think you'd want to run any USB devices through it.

Huh?

http://en.wikipedia.org/wiki/List_of_device_bandwidths

133 MB/s -- 1.064 Gbit/s -- Ultra DMA ATA 133 (EIDE)
192 kB/s -- 1.536 Mbit/s -- USB Low Speed (USB 1.0)
1.5 MB/s -- 12 Mbit/s -- USB Full Speed (USB 1.1)
60 MB/s -- 480 Mbit/s -- USB Hi-Speed (USB 2.0)
 
That's what I thought (as I said above, DVD Burners can run on IDE, but not USB 1.0/1.1) and I remember SCSI devices that IIRC use IDE archatecture. (If anyone's wondering, yes, this is mainly for a DVD-burner, since this micro-pc physically cant have one isntalled or for external HDs (though being able to use my 54g wifi would be nice....)
 
Gah, sorry, I was thinking KB on ATA, not MB. My bad. :eek: I really should have known better. Thanks for straightening me out there, nurd.

OK, back to the matter at hand. I wonder if something like this would work. Yeah, it's intended to plug into the drive instead of the mobo, but they're both 40-pin connectors. Hmmm.......
 
Does the computer have any open PCI slots? If so you can just add a USB 2.0 expansion card.
 
Does the computer have any open PCI slots? If so you can just add a USB 2.0 expansion card.

.... Did you even read the post?

....the PC I'm using right now has NO expansion slots (it's about 1' square, and 3" chick)...

As for IDE to USB, no, there is no such beast, as the IDE bus was not designed to do that. Square peg, Round hole.
 
How about a simple IDE to sata convector. Still a small cable. The problem with usb is that the protocol is not supported over an IDE bus so you won't find any converters for that. It's always IDE over usb.
 
The PC is an HP ePC, 900mhz with 256mb of RAM and a 10gb HD, originalyl instaleld with NT workstation, then upgraded to W2K, then upgraded to XP (and all the CoAs are on the bottom! technically I got 3 OSs in one on the PC) With a CD-RW, onboard Audio, Video, LAN, USB 1.0. (No modem). I opned the case once, and there is 1 RAM slot, and the CDRW is one form a notebook with only an IDE cable and no power cable! Luckily, the HD is a standard HD that *can* be upgraded, if needed.

ATM, this is purely a backup/internet PC. I have it GHOSTed and will probably be restoring it every few months as it gets clogged with crap from teh 'net. I *have* a 3ghz, 1gb ram, 40gb HD with USB 2.0 --- but it's in need of repair at the moment (and sadly I lost my nice 128mb AGP graphics card I had for it! onboard graphics sux for image manipulation and gaming (one thing that lead to my quitting online MMORPGs --- infact almost all graphics-intensive games... ) My little HP is sitting in the bacement, acctually, having been used, otehr than now, only a handful of times (yes, it's slow, but 900mhz/256mb is enouth to surf the net) As much as I'd like to upgrade it, I cant afford to; I just plopped down $200 for a cellphone, and another $250 for a laptop (my old compaq lappy died; look for it's carcus on ebay soon! lol. acctually the screen-to-mobo cable died, and I cant find a replacement, even on ebay, because it's a fairly rare model)

SATA will do me no good, I want the speed, not only for DVD-RW, but also for 802.11g WiFi (possibly 802.11n when it's finally fully standardized) Though if I get desperate to burn a DVD, I may resort to that... The laptop I jsut ordered has USB 2.0 (through PCMCIA, but *shrug*) so I should be able to use it for the DVD-burning, and this purely for 'net browsing and now worry about USB 2.0 for a while.
 
Back
Top