• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Please help with another FlexRaid DRU setup

J Macker

[H]F Junkie
Joined
Jan 25, 2001
Messages
10,167
Hey guys, I'm transitioning over my server and testing out FlexRaid. I would appreciate some help with setting up the drives.

I'd like to have 2 Parity, but that means I need 2 PPU's right? So how much space could I get with 2 parity?
How much space and what configuration if only 1 PPU?

I have the following drives:
5x 2TB (4 samsungs, 1 WD green)
5x 3TB (two toshibas, 3x seagates)
1x 1TB Spinpoint F3

So, what's the best way to set this up?
Should I have
DRU1= 3x 2TB
DRU2= 2x 3TB
DRU3= 1TB+2TB+3TB
PPU=2x 3TB

Which leaves a spare 2TB?

I could (and probably should) use the 1TB drive as a secondary in my main; the Hitachi 1TB drive I'm using now shows "caution" status on crystaldisk.
So, omitting the 1TB drive, the only combination I can think of is 3+2 below:

should I set it up as 5TB dru's?
dru1= 3+2
dru2= 3+2
dru3= 3+2
PPu1= 3+2
PPu2= 3+2

That would give me 15TB total storage, right?
And if I only did 1PPU, then I could have 20TB storage, using the same 3+2 combos?
 
Or, you could just setup two 3TB as PPUs and leave the rest as single DRUs except for one which you will span a 2TB with the 1TB you have.

However, if you plan on buying solely 4TB disks going forward, your last option does make sense.
 
so if I leave them all as separate DRUs and use two 3TB drives as PPUS, then my total capacity would be 19 TB, right (not counting the 1TB drive)?
So, that means s that any two DRUs could fail and I don't lose any data?
 
Back
Top