• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

PLEASE HELP!!! Major raid problem!!!

D

DecimatorXX

n00b
Joined
Oct 28, 2004
Messages
61
just wanted to know what i should do in this sitiuation!

Setup a RAID array(striping on two wd1200 jb's) the array was created successfully and the windows setup starts, i install the raid controller drivers(Koutech SIL680-RAID) and the windows setup formats the drive, and installs setup files.

after this happens, i set to boot from SCSI in the bios,reboot , the system posts, detects the raid controller, and the array successfully. and after that i get a blank screen (the part where the windows splash screen should be ) for about 30 seconds, then the system reboots(always)

is there something im doing wrong?(both drives are jumpered as single master)

PLEASE HELP ME!!!! :(

i really wanna get this array setup tonight :(
 
If the Array is working and can be formatted (Long version not quick) then your array should be reading and writing ok.

Maybe try updating the Controllers bios. This fixed a few of my problems I had setting up my raid array.
 
nothing :( anything else that would cause it? the array seems to work, but windows will not continue setup after the setup files are loaded/restart :mad:
 
You must log in or register to reply here.
Back
Top