Please critique this....

[Spliffstarr]

I have been doing my research for quite a while and checking out the posts that others had made. I am upgrading my kit from a reserator 1+ to the kit listed below. My current case is a p180 but i just bought the case listed below deu to it being recommended as a case to use if on doesn't want to mod a case. i am planning to run my loop in this order:

2x120 Rad---->cpu------>2x120 rad------>Video card 1------->Video card 2------>(maybe the northbridge in future) Res-------->Pump



I plan to mount one rad in the back of the case with a radbox and the other one at the top of the case. What do you guys think?







Swiftech MCR220-QP-RES Quiet Power Dual 120MM
Primochill 1/2IN G1/4 Nickel Plated Brass High Flow Barb Tool Free Ghost Fittings
Coolermaster CM 690 Mid Tower Black ATX Case 5X5.25 5X3.5INT No PS Front USB Sound Firewire & eSATA
Den Cooling System Fillport Blue W/ Wrench
Polypropylene Tee for Water Cooling T Line 3/8IN Barbs
Swiftech H20-220 Apex ULTRA+ Complete System Liquid Cooling Kit
Koolance 3/8IN Quick Connect Shutoff Valve Pair with PCI Bracket
Swiftech MCW60-R GPU Water Block for Most NVIDIA & ATI Video Cards
Swiftech MC14 BGA Memory Heatsinks

 

[R1ckCa1n]

I suggest a full cover block for the video cards unless you have great air circulation and some sort of active cooling right on the RAM for the video cards.

You will also need a larger radiator or possibly two loops.

 

[devilchrist]

DO NOT GET SWIFTECH RAM SINKS.

ok now calmly.. they suck.. well the adheasive sucks and ramsinks will fall off your vid card..
get enzio ones from petrastech. they come with 15min 3M tape which are much better.

 

[sir jman]

order doesnt matter

 

[Spliffstarr]

I have already ordered all the parts. I have some artic silver thermal adhesive and if the order of things doesn't matter then it will simplify the setup for me.Thanks for the comments guys..