planning first OC in several years, input required

Joined
May 2, 2007
Messages
30
recently i've been trolling [H] and it made me want to OC again. my last overclock was an AMD duron 650mhz to 800mhz, pretty sweet huh? :D

for this OC i'm aiming for 3.2-3.4ghz and any input/advice/criticism/whatever will be appreciated.

i've been working on this build for several days now, i'm trying very hard to spend less than $450 on everything. i'm going to use the video card from my current system (x1650 512mb). anyway here it is:

http://www.newegg.com/product/product.asp?item=N82E16811147073 - case, it comes with 1x 120mm fan so i thought i would get another for $3 and make a front to back wind tunnel.

http://www.newegg.com/product/product.asp?item=N82E16813128042 mobo, seems like the best OC'ing board, bang for buckwise, and i'm on a very strict budget.

http://www.newegg.com/product/product.asp?item=N82E16819115016 e6420, it's only a couple dollars more than the e6400 and i've read mostly good things about them.

http://www.newegg.com/product/product.asp?item=N82E16820340029 APIDA 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) - this is the first thing i am unsure of, after less than an hour of research i found some specs for this memory that said the timing was 4-4-4-xx, but i am doubtful, the reason i chose this was because it was the cheapest 2gb of ddr2 800 on newegg.

now to to HSFs, i've spent many hours trolling the [H], newegg, and many other places and i have a few questions.

http://www.newegg.com/product/product.asp?item=N82E16835207001 would this be enough to reach 3.2ghz with the cpu i chose? it seems to be a cheaper version of the Arctic Freezer 7 Pro. what other HSF would you recommend for my build for under $25? also what thermal grease do you use to get the best connection between HSF and CPU?

edit: also looking for PS recommendations, how many watts am i going to need and can you recommend a good value PSU to meet my needs?
 
http://www.newegg.com/product/product.asp?item=N82E16835207001 would this be enough to reach 3.2ghz with the cpu i chose? it seems to be a cheaper version of the Arctic Freezer 7 Pro. what other HSF would you recommend for my build for under $25? also what thermal grease do you use to get the best connection between HSF and CPU?

It would be enough, but i wouldn't recommend. The installation of this cooler is horrible. I had enough with Intel stock HSF. I would definitely recommend Tuniq Tower. Pricey, but worth it.
 
It would be enough, but i wouldn't recommend. The installation of this cooler is horrible. I had enough with Intel stock HSF. I would definitely recommend Tuniq Tower. Pricey, but worth it.

tuniq tower runs $65 :eek:

honestly if i was gonna spend that much on cooling i'd just put another $20 with it and get a water kit
 
tuniq tower runs $65 :eek:

honestly if i was gonna spend that much on cooling i'd just put another $20 with it and get a water kit
high end air cooling is a lot better than you think ;). if you can afford it, definitely go with a tuniq tower or thermalright ultra-120.

just found a freezer 7 pro for $27 + shipping(http://www.casecooler.com/arcofr7.html), definately gonna go with that :)
that's a good heatsink but it still uses the crappy lga775 mounting pins. if you go with an ultra-90 (same price range) you can use their bolt thru kit which is much more secure. or you can always just make your own bolt thru kit with some screws and washers.

anyways, good build. check out svc.com as they have sales on coolermaster cases which are of much better quality than the one you posted. also what psu are you going to use? lastly, if you're going to overclock it's not the greatest idea to get the cheapest ram you can find. $30 more and you can probably nab some g.skill ram.
 
also what psu are you going to use? lastly, if you're going to overclock it's not the greatest idea to get the cheapest ram you can find. $30 more and you can probably nab some g.skill ram.

you're actually exactly right about the ram, i originally had chosen the gskill which is about $120 but then pinched pennies and went with the apida which was $90. i might hold out for an extra week or 2 in order to save up some more cash.

and i'm still unsure about PSU, it would be nice if my generic 450w would handle it, but if not, i'll take any suggestions on a 500w.
 
you're actually exactly right about the ram, i originally had chosen the gskill which is about $120 but then pinched pennies and went with the apida which was $90. i might hold out for an extra week or 2 in order to save up some more cash.

and i'm still unsure about PSU, it would be nice if my generic 450w would handle it, but if not, i'll take any suggestions on a 500w.

Man how prices have dropped in only 6 or 7 weeks, :(
I got this ram for $169 only 7 weeks ago, and I thought it was a great price then. Look at it now,
http://www.newegg.com/product/product.asp?item=N82E16820231098
$96, and still dropping, LOL, Damn, :(

But its good ram and works great with the DS3.

Boy what a great time to build a machine now at these prices.

Looks like what your building is going be decent. Antec makes decent power supplies at a half way decent price if you decide to go that route.
 
Man how prices have dropped in only 6 or 7 weeks, :(
I got this ram for $169 only 7 weeks ago, and I thought it was a great price then. Look at it now,
http://www.newegg.com/product/product.asp?item=N82E16820231098
$96, and still dropping, LOL, Damn, :(

But its good ram and works great with the DS3.

heh you're right, that's a damn good price. this is the gskill i originally chose http://www.newegg.com/Product/Product.aspx?Item=N82E16820231087

the rated timing is 5-5-5 but i could prolly get s'more speed out of it
 
Back
Top