Pentium 4m in a desktop

ribs1

Limp Gawd
Joined
Dec 2, 2005
Messages
216
Hey Guys,
I'm wondering if anyone can help me. I have a Pentium 4m processor SL6CG. I would like to use it in an MSI Ultra motherboard. I'm pretty sure it can work because its 478 pin. Can anyone give any insight on how well this will work? And detailed instructions on how to make it work right?
Thanks
ribs
 
i don't think they make a '4m'. As far as I know, Pentium *M* (if this is what you have) are basically re-engineered P3's that freakin own.

Regardless, if you have a s478 proc and a s478 board, then you shouldn't have any issues but you might want to check into the board spec's to make sure it supports the FSB speeds and features of the processor.
 
Yes,
It is a pentium 4m. Pentium M processor is socket 479, different from pentium 4m socket 478. I'm thinking it might not work because of the speed stepping though.
Anyone else?
Thanks
 
Pentium 4m's do work in a few motherboards out there, though to be honest I don't remember any particular ones. The main issue with it is that the 4m's use speedstep which no desktop board will understand correctly so it'll always run at the lowest multiplier (12x) no matter what. Now of course you can just overclock the fsb like mad to compensate for it, but your mobo's gotta be up for the task.

Maybe someone else can remember a specific board that works with mobiles.
 
ribs1 said:
Yes,
It is a pentium 4m. Pentium M processor is socket 479, different from pentium 4m socket 478. I'm thinking it might not work because of the speed stepping though.
Anyone else?
Thanks


It's hit and miss. My 875P motherboard would not boot with my laptop P4m, no matter the bios version.

The only real benefit is they overclock well if you can get it to work.
 
On another forum, some guy built a P-M system. IIRC, he had to use a M-ATX board, and it ended costing a lot more than it should've. If I were you, I'd just build a better A64 system for the same price.
 
Yeah, if it's a good processor you could probably find a buyer, maybe even here, and turn the cash around for some more desktop-y hardware.
 
i read an article in i think pcworld where they were making the silent pc by using a pentium M since it used a heatsink instead of a heatsink and fan...
 
SomeoneWhoIsntMe said:
On another forum, some guy built a P-M system. IIRC, he had to use a M-ATX board, and it ended costing a lot more than it should've. If I were you, I'd just build a better A64 system for the same price.

This is a P4m not a P-M. I just want it to work so I can use this extra system for surfing on such. I already have a gaming rig.
Anyone else?
 
Back
Top