PCI Express - Power Question (Wattage)

kick

Limp Gawd
Joined
Jul 24, 2005
Messages
210
I recently bought a BFG 7900 GS OC for one of my home PC's and believe the existing power supply should be sufficient (Enermax NoiseTaker 485W... 2x12V @ 32A w/ a 6-pin PCI-Express power auxiliary power connector). Because i'm moving from an ATI card I wanted to test the new nVidia card in another machine here at work to make sure it's not DOA and before tearing into my own system and potentially getting into driver woes, etc.

The only machines I have at my disposal tho are HP dc7600 (P4 HT) and dc7700 (C2D E6300) towers. Both of these ship with a 365W power supply and are minimally optioned (CPU+memory+HDD+DVD), so there's not a whole lot of other devices consuming power. The specs list the PCI-Express slot as max. 75W and there's no additional 6-pin power connector. Factory video options are also limited to low power cards. Would it pose a risk to either the BFG card or power supply if I toss the BFG card into one of the HP's and use the power adapter supplied by BFG (2x4-pin power to 1x6-pin power)? I'm just looking to make sure it posts and do a bit of testing... maybe 3DMark and a demo or two.

Thanks.
 
just get an adapter cable (6pin to 4 pin molex) and i think it should be fine. my 485 watt enermax supports overclocking my 165 opty to 2600mhz (haven't really tried for more) and 5 harddrives, 2 dvd burners, an x1950 pro card, a soundcard, usb/firewire card, 2 gigs of pc4000, several 120mm fans, even more fans, and my water pump. at only about 120 watts more, and powering so much more than what you are, it should work. goodluck :).

watch the voltages during testing and regular use. you can get a older version of everest that was free if you look at a site that hosts old versions of programs (forget what its called). that should help. there's lots of other free utilities that do the same thing. goodluck :)
 
I figured the Enermax was robust enough - that's why I bought it. Haven't been let down by an Enermax yet. It's testing the 7900GS in the HP's that concerns me. They don't have a higher-end power supply installed - just the factory 365W w/o a dedicated PCI-Express power connector.
 
Bah, should be fine.

It wont kill your card if it dies... it should go into over current protection ;)
 
Back
Top