PCI EXPRESS clock speed setting in BIOS?

newls1

Supreme [H]ardness
Joined
Sep 8, 2003
Messages
4,628
Is this supposed to be set @ 100MHZ? or something else when you overclock. And my last question is, what should I set the TRC (row cycle time) too on an average? also, im OC'ing an AMD FX chip, using an asus a8n
 
100mhz is the normal setting for PCI-E. Don't adjust it or you will have problems like when you adjust the PCI bus away from 33mhz. It should stay locked there when you overclock.

I think the TRC should be 7 to get the best results. I think anandtech did some testing where they found the best range to be 6,7,8 for NForce4 (where it was 10 for Nforce3). Of course, that's only if I have the right memory timing :)...might want to double check that.
 
What do you mean anyone? kirbyrj answered your question already. If you just need it reiterated ... 100 MHz and 6~8.
 
I was assuming you had the A8N-SLI. If you have an Nforce3 version you want to use 10.
 
kirbyrj said:
I was assuming you had the A8N-SLI. If you have an Nforce3 version you want to use 10.

Thanks, and sorry if you thought I was rude :( . Just needed to leave, and was in a hurry.
 
Back
Top