PCI-E slot gone bad?

dbr1

Weaksauce
Joined
Feb 1, 2012
Messages
116
My single PCI-E slot on my socket 775 motherboard has stopped working. I lost display signal from my graphics card that was in the slot after I had removed it and reinserted it (to test functionality of another broken motherboard!). The board is otherwise functioning normally. I had to install an old PCI graphics card I had lying around to get video output.

I have swapped 2 known working PCI-E graphics cards in the slot and still no signal. Changed out to a stronger 750W PSU to make sure enough juice was getting there and still nothing. Pulled all but one memory stick, same. Cleared CMOS, same.

Is this a common motherboard failure, to just lose functionality of a single card slot? Any further troubleshooting procedures to try rectify the problem?
 
Take a peek in the slot with a torch and see if there's anything damaged or obstructing the electrical contact (like dust, etc)

A trick that works with RAM is to rub eraser on the stick/slot and insert it/remove it a few times to clear any obstructions
 
Back
Top