• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

PCI card relay switch. Need help please.

E

[em]HEAT

Limp Gawd
Joined
Mar 13, 2004
Messages
312
Ok, just got this relay switch for my water pump, the instructions on the site I bought it from tells me to connect the 12v cord from the pump to the relay card, but I see no place on the card to do that. Am I missing something? Am I going to have to cut the end of the pump cord off in order to hook it up to the relay card? This is the relay card that I purchased.

http://www.xoxide.com/pcirelay.html

Any and all help will be greatly appreciated. Thanks.
 
Yeah cut the cord and you should be able to use the screws to clamp down the wires. Red is + and black is ground -
 
[em]HEAT said:
Ok, just got this relay switch for my water pump, the instructions on the site I bought it from tells me to connect the 12v cord from the pump to the relay card, but I see no place on the card to do that. Am I missing something? Am I going to have to cut the end of the pump cord off in order to hook it up to the relay card? This is the relay card that I purchased.

http://www.xoxide.com/pcirelay.html

Any and all help will be greatly appreciated. Thanks.
Click to expand...

cut the cord, strip the wires back about 5/16" and connect at the top...those 3 screws should be marked B W and Ground :)
 
Jima13 said:
cut the cord, strip the wires back about 5/16" and connect at the top...those 3 screws should be marked B W and Ground :)
Click to expand...

They are marked- N G L
 
Ok, here are a few pics of the stuff that I'm working with.

relay_board.JPG




pump_cord.JPG
 
ok, so you have a 2 wire...inside that insulation cover you should find black& white, just connect as I mentioned earlier ......I have a via 1300 (2-wire) in one system hooked up to a pump relay, works fine.
 
dont cut the pump cord.
buy an extension cord and cut that.. then plug your pump cord into it.
 
He wouldn't want to cut his pump cord incase he wants to sell it right? Well he could just sell the pump with the relay card, it would be worth more then anyway.
 
can you take a pic of the underside of that card? i would like to know if it has the soldering points out in the open like the criticool2 does......
 
You must log in or register to reply here.
Back
Top