PCI card no longer detected?

STL

Supreme [H]ardness
Joined
Oct 20, 2001
Messages
4,313
While setting up my new computer, I switched an Adaptec 29320-R (SCSI RAID) with a 3ware 8506-8 (SATA RAID). Before the SATA card was in the second PCI slot from the top and the SCSI card was below it; now the SCSI card is on top.

The system is no longer recognizing the SATA RAID card, but it can see the SCSI RAID card fine. Could running the system with the card out of the PCI slot, but with the SATA cables still plugged in, have damaged the card (or worse, the drives - uuurgh) - I don't think so...

Any ideas as to why the card isn't being seen anymore?
 
That's a good idea and I was about to try that in desperation.

I have now discovered that:

1. If you want to boot from a card, it's got to be topmost (so putting the SCSI RAID card into Slot 2 was the right solution to my other problems).

2. If you've completed the first phase of an XP install (text, not GUI) and you didn't provide the SATA RAID drivers then, the mobo won't even load the SATA RAID BIOS upon bootup.

I just reseated the SATA RAID card, hooked up the drives, and started XP Setup, and it now sees the array. Yay.
 
Back
Top