Pc wont work with new memory

Ranger

n00b
Joined
Jul 26, 2005
Messages
45
For christmas I got a stick of 512 ddr 400 pqi ram from newegg. I already have a gig stick of corsair value select ram in my pc. When i put my new 512 stick in any of the 3 open slots when my gig is still in my pc wont recognize it. Depending on where each piece of ram is it either A) wont actually start windows at all or gives me a hardware configuaration problem screen and asks if I would like to boot in safe mode, if I select use previous hardware settings it sometimes just freezes when loading windows OR just reboots and does the same thing over (i.e. same hardware problem screen). B) pc doesnt boot at all and the motherboards speaker just blares its horrible error siren thing at me.

Ive been informed that if the ram sticks dont work together in ANY combination on my motherboard then it is a timing issue. This means moot to me.

So basically I just want to be able to use my 512 stick of ram with in conjunction with my 1 gig stick. Any help on what the problem is or how to solve it would be most appreciated, and I will happily give any information needed on ram etc.
 
what core is the 3000+?

one major no-no you're doing is trying to run 3 sticks of ram in a s939 rig. if it works, you'll have to drop clock speeds and relax command rate, which kinda negates the usefulness of 2.5gb over 2gb :(
 
Ive only got two sticks of ram, one is a 1 gig stick, the other is the 512 stick. I just cant get my pc to run when i put the 512 in with the 1 gig
 
oh, i see. that 2nd link goes to a ddr2 part you know ;)

also, you didn't tell us the core of the cpu.. venice or winchester

also, do you have the latest bios for the mobo?
 
Mixing RAM is always a bad idea. Mixing three different sticks in different capacities is worse. Sounds like your motherboard doesn't like it, that's all.
 
Finally found out that my mobo only supports the same type of ram if your going to put multpile sticks in. Thanks for all help guys
 
Back
Top