Pc wont boot with more than 1 memory card?

Don_P

n00b
Joined
May 4, 2008
Messages
9
Hi all.

My PC wont boot when I add more than one stick of RAM. I initially had a problem when it took several times of restarting computer in order for it to boot.

The current situation is that whenever I add more than one stick of RAM, the PC wont boot. However, it boots with either stick of RAM in any memory slot (of which there are four for DDR2 and two for DDR3).

I am using the DDR2 800 (all sticks are DDR2800). One of the sticks of RAM is completely new, the other is old. I have another one kicking about which I thought was faulty as upon removing it my PC worked fine. I guess that may still work and ideally would like to use all 3 to give 3GB of RAM.

I have flashed my bios to the latest firmware. I have tried every combination of memory stick placement possible.

1 GB of RAM just aint gonna cut it for me, and I am currently scratching my head trying to work this one out.

As far as I can see it - all memory sticks work. All slots work, they just dont work together.


If anyone has come across a similar situation or has any ideas, I would be grateful.

cheers,

Paul



Computer:

Computer Type ACPI Multiprocessor PC
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
Internet Explorer 7.0.5730.13
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name ROBOCOMP-1CC430
User Name user
Logon Domain ROBOCOMP-1CC430
Date / Time 2008-07-10 / 01:20





Motherboard:

CPU Type DualCore Intel Core 2 Duo E6550, 2000 MHz (6 x 333)
Motherboard Name Gigabyte GA-P35C-DS3R (3 PCI, 3 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, 2 DDR3 DIMM, Audio, Gigabit LAN)
Motherboard Chipset Intel Bearlake P35
System Memory 1024 MB (DDR2-800 DDR2 SDRAM)
BIOS Type Award Modular (03/27/08)
Communication Port Communications Port (COM1)
Communication Port Printer Port (LPT1)

Display:

Video Adapter ATI Radeon HD 2400 PRO (512 MB)
Video Adapter ATI Radeon HD 2400 PRO (512 MB)
3D Accelerator ATI Radeon HD 2400 Pro (RV610)


Multimedia:

Audio Adapter ATI HD 2xxx HDMI @ ATI Radeon HD 2400 - High Definition Audio Controller
Audio Adapter Realtek ALC885/889A @ Intel 82801IB ICH9 - High Definition Audio Controller


Storage:

IDE Controller Intel(R) ICH9 2 port Serial ATA Storage Controller 2 - 2926
IDE Controller Intel(R) ICH9 4 port Serial ATA Storage Controller 1 - 2920
IDE Controller Standard Dual Channel PCI IDE Controller
Floppy Drive Floppy disk drive
Disk Drive WDC WD5000AAKS-22TMA0 (465 GB, IDE)
 
Can you list the specifications of each individual memory module. In some cases, mixing and matching memory modules won't work. This is especially true with dual channel MOBOs. If they all pass Memtest but won't together, you will likely need to either:

A: Buy another module that EXACTLY matches one of your existing modules or....

B: Buy a matched kit of memory and find another use for your current modules.
 
ok, i will try that out.

I should point out that the initial two were identical RAM, though I have not looked to see if the other one still works individually. I bought crucial ballistix before but gonna stick to the cheaper variety. Had too many of them break down on me before.


cheers
 
[ DIMM1: GeIL CL5-5-5DDR2-800 ]

Memory Module Properties:
Module Name GeIL CL5-5-5DDR2-800
Serial Number None
Manufacture Date Week 27 / 2006
Module Size 1 GB (2 ranks, 4 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh

Memory Timings:
@ 400 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 23-42-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 333 MHz 4-5-5-13 (CL-RCD-RP-RAS) / 19-35-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 3-4-4-10 (CL-RCD-RP-RAS) / 16-28-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)

Memory Module Manufacturer:
Company Name GeIL USA
Product Information http://www.geilusa.com/products




[ DIMM1: Crucial Tech. (1 GB DDR2-800 DDR2 SDRAM) ]

Memory Module Properties:
Module Name Crucial Tech.
Serial Number 810137C5h (3308716417)
Module Size 1 GB (2 ranks, 4 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh

Memory Timings:
@ 400 MHz 5-5-5-18 (CL-RCD-RP-RAS) / 23-42-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 333 MHz 4-5-5-15 (CL-RCD-RP-RAS) / 20-35-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)

Enhanced Performance Profile:
Profile Name High Performance
Optimal Performance Profile No
Memory Speed DDR2-800 (400 MHz)
Voltage 2.2 V
Memory Timings 4-4-4-12 (CL-RCD-RP-RAS)
Row Cycle Time (tRC) 24T
Command Rate (CR) 2T
Write Recovery Time (tWR) 6T

Enhanced Performance Profile:
Profile Name High Frequency
Optimal Performance Profile Yes
Memory Speed DDR2-1066 (533 MHz)
Voltage 2.2 V
Memory Timings 5-5-5-15 (CL-RCD-RP-RAS)
Row Cycle Time (tRC) 29T
Command Rate (CR) 2T
Write Recovery Time (tWR) 8T
 
ok, so i put in the old memory card which i thought didnt work, and it booted. I put in both the crucial ones which are the same, and for some reason it is working. Doesnt work with the new memory card, guess that is because of the different timings as shown above.

Since the previous problems, I have stripped the computer, cleaned everything and installed a fresh image so perhaps it was something previous other than the memory. Thats been nagging me for about 2months now.


cheers.
 
In some cases, you'll need to clear the bios after making memory or other hardware changes.
 
Back
Top