PC Turns Off When Burning CDs or DVDs

sabwafare2001

Weaksauce
Joined
Jul 31, 2002
Messages
95
I have been having this issue where when I burn CD or DVD with any program(Nero or DVD Decrypter) and a file of any size, my computer shuts down and doesn’t restart. I have to manually start it. This happens right after 1% burning progress. This problem started when I installed a HD3850 512MB from a HD3850 256MB, 2GB more of Ram to a total of 4gb, and a AMD 6000+ X2 from a 3800+ X2. In addition to those to those items, I have 2 SATA HDD, 1 SATA DVD-ROM, IDE DVDRW, MSI K9N Platinum V1.0, and various HDD connected via USB.

To try to fix this issue, I have uninstalled the new RAM, switching to a more powerful PSU (450W to Antec Trio 650W), removed external USB devices, and unplugged power from internal devices inside case and still have this issue. I did not see errors when I checked the Event Viewer under Admin Tools. I am not sure it’s temp since they are the same from when it was first working.

So what could I try next to solve this issue? Thanks for you help.
 
Haven't you tried a different burning drive in the system?

Sounds like that one is haywire, and maybe shorting out or something when it's burning laser is initiated.
 
What drive are you using to burn that shuts yr pc off? I do a lot of burning myself but never had a problem like that.
 
For one thing I know is you upgraded a lot. You went from hd3850 256 to 512mb, and from x2 3800 to 6000. You also have a lot of drives going to at the same time. Amd cards and processors draw a lot of power and heat.

Can you give us system specs pls?
 
The specs are:
MSI K9N Platinum
Athlon 64 X2 6000+
4x1GB – 2xCosair XMS and 2xKingston Hyper X PC6400 DDR2 Ram
2x160GB SATA HDD
Shappire HD3850 512MB
Antec True Power Trio 650W PSU
Sony Optiarc DL DVDRW
SATA DVD-ROM
View Sonic x922

I haven't tried a new burner. I have only experienced this used Nero and DVD Decryper which are the only softwares I burn with.

I did not experience this issue with the HD3850 256MB. Would there big that big of difference between the 512 version. I am using one of the top brand PSUs, with I think a good amount of watts.
 
DVD burners use a very small amount of power, I HIGHLY doubt it's your PSU.
I doubt it's your video card or RAM or other component.
I suspect while doing the install you may have ESD shocked something and caused some degradation in your optical drive, or maybe it's coincidence and your drive randomly failed.

I would borrow or some other way try a different burner drive first and foremost.
 
I don't think it makes a difference going from 256 to 512 on yr 3850. Just make sure you have the latest Catalyst drivers downloaded. Nero & Decrypter would not cause your system to shut down if anything it would cause it to freeze.

It might be your Sony drive that's the culprit.
 
Do you mean shut down as in Windows shutdown or power off in an instant? The former could conceivably be a software bug and not hardware. The latter could be a seriously wonky drive problem - try borrowing another drive and testing it in the place of the Sony.
 
It shuts down as if power has been pulled. Only the DVDRW is used in these instances. I will try to find in extra DVDRW when I get home to try it.
 
Back
Top