PC build for IP cam recording.

nasdaq

n00b
Joined
May 18, 2007
Messages
60
I have purchased an Airlink SkyIPCam 500W, a wireless IP cam, for monitoring an area around my house. I would like to record the images that it produces throughout the day, and would like to know that best way to go about this. At the time being I only have two of the IP cams, but I plan on buying a few more since Airlink's software supports up to 16 cams.

Would building this type of a PC for recording purposes require something along the lines of a dual core CPU or would single core be sufficient enough? I have some components left over such as, two 320 SATA HDD, Intel E4300 CPU, motherboard, RAM, Video Card, PC case, etc. Have not decided if I will use Windows or Linux as the OS.

Right now the cams are connected to my main PC consisting of an AMD Opteron 165 with 1.5GB RAM. I wish to build this new PC just for the IP cam recording purposes.
 
I am not sure how powerful of a machine you really need to take still images. I'd imagine that a box a few years old would be sufficient. I image drive space will be more of an issue depending on resolution of images.

I know a guy at work has a similar set up, I will ask him tomorrow. He streams three feeds from his house to work, not sure what he records, if any.
 
Either of your systems should suffice. zoobaby is right, you have to decide on the resolution and consequent disk space needed to accomodate those recordings.
 
Thanks for your replies. Since HDD prices are so low getting a 750GB or 1TB will not be too costly.
 
Talked to guy at work and his system that handles the cams is recent but nothing special. Just a large HDD.
 
Thanks! I will just get a large HDD and use the software that's included with the IP cam.
 
I recently setup a very simmilar setup for our technical centers at work, thought I'd give you some input on what I used:

Shuttle KPC as a host: Its cheap, small, and quiet
Processor: something from the core 2 line, it was $50 off buy.com... sing core
1gb ram 667: you dont need much
HD: 2x 640GB drives from newegg... great performance and good capacity

you could do the same with one less drive. my whole setup was less than $500 and is overkill for what we're doing (we have 8 camera's)
 
Thanks for the help everyone but if I may ask a follow up question.

I want to build this box just for recording purposes for the IP cam, but want to add it to my home network via wireless connection. I would like this new box to be situated in the living room and be able to control it from my main PC which is in my bedroom. What would I need in order to make this particular type of set up function?
 
Back
Top