• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

PC-A17B Question/Request

A

ATLPIMP

[H]ard|Gawd
Joined
Jun 27, 2002
Messages
1,125
Can anyone who has the PC-A17 do me a favor and measure the clearance of the bottom 6 drive bays, with a drive installed in the seventh? I would like to know if there's enough room for a 2X120 radiator.

Maybe this will help:

space.jpg
 
How about a picture of the front of the case with the cover removed?

How are the fans secured?
 
check out how the fans are secured, then go look at how tall the radiator your going to buy is, it should take up atleast 6 5.25" bays, and depending on how low the bottom of your pc is then it should fit. it may take up the 7th bay drive due to the barbs.
 
I was able to find some front pictures on the LL site, and I've taken measurements of my radiator, and it will fit.... like you said it may take the seventh bay as well, depending on how deep (at the bottom) the case is. I'll have to make some brackets to mount the radiator to the bottom. In any event, I'll know in the next few days once mine gets here.:cool:
 
ATL check this out ---->link
There is room enough for a Drive and 5.25 fan controller in the upper 2 slots.

I was dead set on getting this case and already planned out a 2x120mm radiator in the bottom front with the LL brackets. Going to have to set it aside for a future build for now. You can also mount the drives to the side if you decided for a 3x120mm radiator.
 
You must log in or register to reply here.
Back
Top