I'd like to see some comments. I ordered from Scan.co.uk (living in the UK) except for the DVD-writer.
Case: Coolermaster Praetorian 732 Silver full aluminium
PSU: 750W SilverStone SST-ST75ZF Black SLi/Xfire Quiet ATX12V 2.2 EPS12V
Board: Gigabyte GA 965P-DQ6
CPU: Intel Core 2 Duo E6400 S775, 2.13Ghz Retail
Cooler: Scythe NinjaPlus with 120mm quiet fan
RAM: 2Gb (2X1Gb) Corsair TwinX XMS2, DDR2 PC6400(800),Non-ECC Unbuffered, CAS 3-4-3-9, EPP
Video: 1Gb XFX 7950GX2, PCI-E (x16), Mem 1200 MHz, GPU 500 MHz, 48 Pipes, S-Video/2xDVI
DVD: LG DVD DualLayer +/- silver
HD: 2x 150Gb WD1500ADFD Raptor Enterprise, SATA150, 10000rpm, 16MB Cache, NCQ, 4.6 ms
Oh, and I took the 6400 and not the 6300 because I prefer the higher multi for overclocking
I am quite an old hardcore overclocker, started with my Amiga 1200 ages ago, replacing an oscillator on a Blizzard Turbocard (resulting in an 50 Mhz 68040 instead of 40 Mhz...yes, needed a soldering iron
). Then overclocked my first PC (Pentium 166 MMX to 200 Mhz before even turning it on the first time). Watercooling, Peltiercooling, you name it, I did it. But for the last year or so, I only had a laptop and now it's time to get back to the game...
Anything you would have done differently regarding my new build and if so, why and what?
Case: Coolermaster Praetorian 732 Silver full aluminium
PSU: 750W SilverStone SST-ST75ZF Black SLi/Xfire Quiet ATX12V 2.2 EPS12V
Board: Gigabyte GA 965P-DQ6
CPU: Intel Core 2 Duo E6400 S775, 2.13Ghz Retail
Cooler: Scythe NinjaPlus with 120mm quiet fan
RAM: 2Gb (2X1Gb) Corsair TwinX XMS2, DDR2 PC6400(800),Non-ECC Unbuffered, CAS 3-4-3-9, EPP
Video: 1Gb XFX 7950GX2, PCI-E (x16), Mem 1200 MHz, GPU 500 MHz, 48 Pipes, S-Video/2xDVI
DVD: LG DVD DualLayer +/- silver
HD: 2x 150Gb WD1500ADFD Raptor Enterprise, SATA150, 10000rpm, 16MB Cache, NCQ, 4.6 ms
Oh, and I took the 6400 and not the 6300 because I prefer the higher multi for overclocking
I am quite an old hardcore overclocker, started with my Amiga 1200 ages ago, replacing an oscillator on a Blizzard Turbocard (resulting in an 50 Mhz 68040 instead of 40 Mhz...yes, needed a soldering iron
Anything you would have done differently regarding my new build and if so, why and what?