P8P67 slow cd-rom

SirMarty

Weaksauce
Joined
Nov 26, 2005
Messages
81
I just upgraded (see sig, video card will be upgraded soon ...) I realized as I was building the system that my old (reliable though) PATA burner wasn't gonna work due to lack of PATA port on the P8P67. I used an Asus SATA reader that I had and it ran quick enough during windows install, after that, I can't autorun or even open any CD's, DVD's (stamped, or burned) in windows explorer. Any ideas anyone ? I've updated drivers, ensured DMA is on. I've got a new drive coming, but am trying to see if its a drive or driver/software issue.
 
You using a B3 board or a launch board? Could be a bad SATA port.
 
Ya, its a B3 board. I'll try other ports through. Any reason why that'd work ?
 
Because you have two different chipsets for the SATA ports on your board. Perhaps once just isn't liking your DVDROM drive. Then you also have the fact that some are SATA3 while others are SATA6. It really shouldn't matter, but there are differences. Worth a shot investigating before calling in a RMA.

BTW do you have another optical drive on hand that you could test out?

http://www.newegg.com/Product/Image... USB 3.0 ATX Intel Motherboard with UEFI BIOS

Intel® P67(B3) chipset :
2 x SATA 6Gb/s port(s), gray
4 x SATA 3Gb/s port(s), blue
Support Raid 0, 1, 5, 10
Marvell® PCIe 9120 controller : *2
2 x SATA 6Gb/s port(s), navy blue
 
It really shouldn't matter, but there are differences. Worth a shot investigating before calling in a RMA.

No differences. A SATA 6Gb/s port can and will behave as a 3Gb/s port when such a device is connected to it. I believe it can behave as 1.5Gb/s too.
 
Different ports didn't matter. I did get a new drive last night and the speed issue is resolved. Any ideas why it only affected the old drive ?
 
Different ports didn't matter. I did get a new drive last night and the speed issue is resolved. Any ideas why it only affected the old drive ?

Firmware. The firmware of the older SATA optical drive was released long before the Sandy Bridge platform was even conceived. In fact, the firmware of that older drive dates back from before Nehalem (first-generation i7) CPUs were even on the market. As a result, the firmware of the older drive turned out to be incompatible with newer SATA controllers.
 
Last edited:
Back
Top