chimera991
[H]ard|Gawd
- Joined
- Sep 4, 2010
- Messages
- 1,170
Right now I'm using the rig I'm posting this problem with.
While the computer was on I looked at the back of my computer, I noticed the back fan (pull fan thats attached to the case then the corsair h60's rad) wasn't running at all.
I turned off the computer and unplug CHA_FAN1 (back fan), replug it in and still no power on the fan.
I then try CHA_FAN2 which is next to the mobo's green on light and cant even power up the rig.
I then try CPU_FAN which is what the PUSH fan was plugged into, basically swapping the plugs, now the PULL (back) fan is running and the front (push) isn't.
WTF is going on, my temps seem to be ok with only one fan running but I want both fans to, but after checking the MOBO fan sensor, it doesn't seem to sense the fan is even plugged in.

Power fan is the pump/cpu block.
While the computer was on I looked at the back of my computer, I noticed the back fan (pull fan thats attached to the case then the corsair h60's rad) wasn't running at all.
I turned off the computer and unplug CHA_FAN1 (back fan), replug it in and still no power on the fan.
I then try CHA_FAN2 which is next to the mobo's green on light and cant even power up the rig.
I then try CPU_FAN which is what the PUSH fan was plugged into, basically swapping the plugs, now the PULL (back) fan is running and the front (push) isn't.
WTF is going on, my temps seem to be ok with only one fan running but I want both fans to, but after checking the MOBO fan sensor, it doesn't seem to sense the fan is even plugged in.

Power fan is the pump/cpu block.