P5Q3 Deluxesettings

Joined
Jan 17, 2009
Messages
761
Hey all. Just got a Mobo from a fellow member and just wanted to know if any of you are running the same setup. I tinkered a bit with the O/Cin' and managed to get 4.2ghz on my Q9550, but the vcore needs to be what I think is a bit high. 1.46v and even then its not 100% IBT stable, not to mention the temps kinda spook me. 4.0ghz @ 1.4v is good, but I just left everything auto but the vcore, so I'm guessin the rest of the voltages are way up. Same thing happened on my UD3R.

Anyway, the point to this thread...anybody running the same setup that can post up their bio settings? BTW, the RAM is Corsair XMS 3 TW3X4G1600C9DHXNV 1600 speed stuff.

Thanks
 
Jeesh, just realized this prob shoulda been in the O/C forum. Any mod out there wanna give it a slide over if ya think it should be moved?
 
I would agree with Zero82z, I would advise keeping the system at 4.0GHz and at 1.4v there it is a waste heat and voltage to go any higher for really no real gains. Additionally at those higher voltages ranges you really begin applying additional stress to the CPU and VRM and this can lead to degradation issues in the long term and even component failure. Please enjoy the rest of your day.
 
Update...well, figured out what I believe was my problem. Started having issue with the lan connecting, and disconnecting. Fiddled around for a few hours with that but couldnt resolve the issue. Started reading and came across a small little mention about another guy having a similar prob and a BIOS update took care of it. Well, I went ahead and flashed my mobo and amazingly the LAN issue went away. Now is where it get good. Went back and took another swing at my OCs. To make a long story short...I'm sitting here @ 4ghz on 1.28v IBT stable with max temps of 82. Normal heavy gaming and benchmarking doesn't push it past 65c. I did give it some juice to see where I could get this board and managed a fairly stout 4.38ghz (8.5 x 516) with 1.45v. Got into windows, but not IBT stable and the temps went thru the roof in a matter of 30secs, LOL. That was just for fun and I don't expect to toss that kinda voltage to a cpu under air cooling. I'm content with a nice 4ghz and being able to run the volts under 1.3 is just great. Just thought I'd share.
 
Back
Top