P5ND2-SLI SLI Selector card?

Arnette

n00b
Joined
Nov 8, 2006
Messages
15
Hey all,

I have a P5ND2-SLI board on my folding PC here at the office. I currently have a 9600gt in it, and will be receiving a second one from an RMA this week.

I noticed there's an SLI selector card on the board, where you can choose between dual-card and single-card mode. I want to set up the cards seperately, not in SLI-mode, so that seperate GPU's can be selected for folding.

Does the SLI selector card affect anything other than slot speed? To my understanding, having the selector card in "dual-card" mode puts both slots to pci-e x8/x8, while leaving it in single mode keeps the primary at x16, and the secondary at x1

I can't find any forum posts about this little selector card, and was hoping someone could help :)
 
I'm pretty sure it only affects the lanes allocated to each slot. SLI is controlled by the drivers, so regardless of whether or not that card is in the SLI position, SLI will only be on if you enable it through the nVidia Control Panel.
 
Thanks :)

As it turns out, the controller card just switches between 8x/8x and 16x/1x mode on the board slots.

I have it set at 8x/8x, without the SLI bridge attached, and both cards are working in Windows 7 without a dummy plug on the second card. They're getting 4177.97 ppd each, which makes me a happy panda.
 
Back
Top