• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

P4P800 Vdrop mod ROCKS

K

KaptainBlaZzed

Limp Gawd
Joined
Jan 12, 2005
Messages
493
I just did the P4C800 Vdrop mod from malvescorner.net and this thing rocks!!
I have the P4P800-E Deluxe Revision 1.02 and i did the mod for the P4C800 because the resistors on my board looked like the ones on the P4C800.
Anyways it worked perfectly and allowed me to raise my overclock. I soldered a 50K timmer set to 28k to the board and turned it on. One thing that happened
that i did not expect from this mod was it also raised my vcore by about .4 volts so now
i can run my prescott at 1.62 - 1.64 volts.
Now my vcore almost never fluxuates and if it does it goes up not down.
Before the mod i coulld only SuperPi @3840

Here is some proof for all those Nay-Sayers a 3.2E @3952 stable on H20
superpiepatched.jpg


Here is a picture of my mod (sorry for the bad pic but i alread put the computer back together when i took this)

VDROP.JPG
 
You must log in or register to reply here.
Back
Top