SkaarjMaster
[H]ard|Gawd
- Joined
- Jan 31, 2002
- Messages
- 1,576
I just ordered this MB as a replacement for my possible RMA of the Dragon2 board and noticed the interrupt table wasn't as clean as the one for the Dragon2. I know WinXP has now taken care of a lot of the IRQ sharing issues, but just for fun let's say I'm installing Win98SE with this board. First, here's the table:
Int A - AGP slot
Int B - nothing
Int C - Onboard Audio
Int D - nothing
Int E - PCI 4, onboard USB, onboard 1394
Int F - PCI 1, PCI 5, onboard USB
Int G - PCI 2, onboard USB, onboard LAN
Int H - PCI 3, onboard USB, onboard RAID
Next, just looking at the table a few things don't make sense, so here's some questions on that and some other things related to the table if anyone can help:
1. Why nothing at Int B and Int D? Seems like a waste of interrupts, why not put maybe the RAID and LAN there or leave the RAID and LAN where they are and put the USBs from those interrupts there?
Seems to be no issues with AGP or onboard audio, but I won't be using the onboard audio. I will most likely be using only the PCI4 slot (sound card) since some others will be blocked by my VGA Silencer or the sound card game controller plugin. I will also be using the onboard RAID in Ultra/regularIDE mode and the onboard LAN.
2. USB seems to be sharing with all these on various interrupts. How does this work? Let's say I have two USB devices and the system sees that I'm using PCI4, onboard RAID and onboard LAN, would it then assign only interrupt F to these USB devices? Would this depend on which USB port I plugged these devices into? How do I know which port goes to which interrupt?
I guess there's only two main questions. Any help given would be appreciated. Thank you.
Int A - AGP slot
Int B - nothing
Int C - Onboard Audio
Int D - nothing
Int E - PCI 4, onboard USB, onboard 1394
Int F - PCI 1, PCI 5, onboard USB
Int G - PCI 2, onboard USB, onboard LAN
Int H - PCI 3, onboard USB, onboard RAID
Next, just looking at the table a few things don't make sense, so here's some questions on that and some other things related to the table if anyone can help:
1. Why nothing at Int B and Int D? Seems like a waste of interrupts, why not put maybe the RAID and LAN there or leave the RAID and LAN where they are and put the USBs from those interrupts there?
Seems to be no issues with AGP or onboard audio, but I won't be using the onboard audio. I will most likely be using only the PCI4 slot (sound card) since some others will be blocked by my VGA Silencer or the sound card game controller plugin. I will also be using the onboard RAID in Ultra/regularIDE mode and the onboard LAN.
2. USB seems to be sharing with all these on various interrupts. How does this work? Let's say I have two USB devices and the system sees that I'm using PCI4, onboard RAID and onboard LAN, would it then assign only interrupt F to these USB devices? Would this depend on which USB port I plugged these devices into? How do I know which port goes to which interrupt?
I guess there's only two main questions. Any help given would be appreciated. Thank you.